Belkin Docking Options
The Belkin Docking Ring
Belkin has designed the Router to link together with other Belkin networking products through the unique docking ring on the side of module. It will fit into the mating ring of another Belkin network product such as the 5- or
Wall Mounting the Belkin Gateway Router
Belkin provides an adapter that will allow the unit to be mounted to the wall. The adapter is available at belkin.com. To install the wall mount follow these steps.
1.Use the wall mount as a template and mark the screw holes on your wall with a pencil.
2.Drill holes in the wall and insert screw anchors (not included) into the wall.
3.Insert screws into the anchors and turn them in just far enough so when the wall mount is placed on the screws that it is snug but still able to slide.
4.Snap the wall mount into the docking ring on the Router.
5.Line up the wall mount’s holes with the screw heads and push the wall mount over them. Slide the Router and wall mount down over the screw heads to secure it to the wall.
5