Belkin F5D5230-4 manual Step

Page 27

Step 4

3.Click "MAC Cloning/Entry" on the left-hand side of the screen. The following screen will appear.

4.If your ISP assigned you a host name, enter the host name here. If not, leave this field blank.

If your ISP binds the connection to a MAC address, you will need the Router to copy that MAC address. If your ISP does bind your MAC address, or you are not sure, follow this step.

5.Click "Clone MAC Address". This will clone (copy) the MAC address of the first PC connected to the Router. This will also ensure that the ISP, if it binds your connection to that MAC address, that it will remain active. Click "Enter" to save the settings

6.Your Router is now set up and you will be able to access the Internet from any PC on your network.

25

Image 27

Contents Port Cable/DSL Gateway Router Table of Contents Built-in Dhcp Integrated 10/100 4-Port SwitchIntroduction NAT Firewall SecurityPackage Contents Web-Based User InterfaceSystem Requirements Product Descriptions Rear Panel WAN Link StatusBelkin Docking Options Belkin Docking RingWall Mounting the Belkin Gateway Router Is my IP address Static or Dynamic? Sharing Your Internet Connection Is Done In 4 Easy StepsDoes my connection have an assigned host name? Does my Internet service provider use PPPoE?Step Is my connection bound to a MAC address?My IP Address is User Name Assigned by your ISP Password Service NameStep Write your IP Configuration settings here Connect Your Equipment Basic Parts Required for Each Computer on Your ListNIC Step Setup your computers for networking Installing the Belkin Soho Networking SoftwareConfiguring Your Computers Using Belkin NetSetup Step Step Step Step Step Step Verify That Your Computers are Networked Step Accessing the Web-Based Setup Utility Configuring Your Router if Your Provider Uses Dynamic Step Step Step Step Configuring Your Router if Your Provider Uses PPPoE Step Click MAC Cloning/Entry. The following screen will appear DMZ Settings Intrusion Detection On/OffSecurity Log Virtual Server Settings Special Application Settings Client Filter Settings NAT Enable/Disable Services LAN Dhcp SettingsUtilities Change PasswordSet Time Zone Remote ManagementRestore Defaults ResetUpdate Firmware Problem Possible Cause/Solution TroubleshootingBetween the Gateway Router Make sure your computers Make sure the coaxial cable Glossary of Terms Glossary of Terms Port Cable/DSL Gateway Router F5D5230-4 Product SpecificationsCE Declaration of Conformity Warranty, FCC, CE StatementP73794