Display information
into edit mode. This is indicated by the scroll bar becoming longer.
| SETTINGS | |
|
|
|
DPMS |
| On |
|
| On |
Power LED |
| |
User Controls |
| On |
EXIT |
|
|
| ||
Figure 3: Setting is selected | ||
|
| |
| SETTINGS | |
|
|
|
DPMS |
| On |
Power LED |
| On |
User Controls |
| On |
EXIT |
|
|
|
|
|
Figure 4: Edit mode is active
Use Up 
or Down 
to change the value. Use Enter 
to confirm the change.
Changes are saved automatically after confirming.
6.Some items in the menus cannot be changed. They are read- only values, displayed in light gray.
Tip:
While you are adjusting a value:
•Touching Up and Down at the same time resets to the last stored value.
•Touching Up and Enter at the same time selects the maximum value.
•Touching Down and Enter at the same time selects the minimum value.
Stand-by switching
To switch from on state to stand-by:
1.Touch the Stand-by 
touch key.
19