Barco Fusion 4MP manual Switching Power LED on/off, Enabling/disabling User Controls

Page 32

Display information

Switching Power LED on/off

To switch the power LED on/off:

1.Touch any of the soft touch keys. The front illumination is switched on.

2.While the illumination is on, touch the Enter touch key to display the main menu.

3.Use the Up or Down touch keys to select the Settings menu. Use Enter to open the menu.

4.Use Up or Down to select Power LED. Use Enter to go into edit mode.

5.Use Up or Down to select On or Off.

6.Use Enter to save the changes.

Note:

•When the display is switched in stand-by, the power LED will turn orange, even if the power LED setting is switched off.

•When the power LED setting is switched off, the LED will still turn on (green) when the display is on but receives no video signal.

Enabling/disabling User Controls

To disable the user controls:

1.Open the OSD main menu.

2.Open the Settings menu.

3.Select User Controls.

4.Select Off.

5.Return to the Settings menu.

Image 32

Contents Nio Fusion 4MP This page intentionally left blank Sources of information User interfaceOverview of product documentation Items in the navigation frameItems in the toolbar frame Graphic board control panel Languages supportedAccessing the Barco tab Using the Barco tabStart Settings Control Panel Display Barco Driver PropertiesDisplay Information Barco system reportBarco Adapter Configuration Advanced properties for Mxrt controllerMediCal QAWeb Display LayoutDisplay Resolution Bit TrueColor Mode Bit TrueColor Mode HDRColor Format Clone Primary display is cloned to the secondary displayMain Settings Custom SettingsOpenGL and Direct3D Wait for Vertical SyncWait for Vertical Sync RotationDevice Details Activating a configuration profile Modifying the configuration parametersOpenGL Profiles Adding a new application profileConfiguring the Windows desktop Graphic board control panel Precautions Optimize the lifetime of your displayUse a screen saver to avoid image retention Understand pixel technologyEnhance user comfort Maximize Quality AssuranceDisplay controls Overview of controlsFront controls are soft touch keys To move down or decrease values in the OSDHow to use the controls To put the display in standby modeTouch the Stand-by touch key Stand-by switchingTo switch from on state to stand-by Info messages Luminance and color menu On-screen display OSDComplete OSD Display Function menu Reading room definition submenu Settings menu Input Switch Mode Select Auto if you wish the display to Changing Display Functions Information menuConcepts InformationDisplay function selection To select a display function DFALC & Dicom Options You can select the following DFsDicom offset IntroductionUse Enter to confirm the selection To select a reading room settingYou can select the following offsets You can select the following reading room types To modify a reading room definitionSwitching Dpms on/off To switch Dpms on/offSwitching Power LED on/off To switch the power LED on/offTo disable the user controls Enabling/disabling User ControlsTo enable the user controls again Barco web sites Visit Barco at Visit Medical Imaging atNovember