Barco Fusion 4MP manual Advanced properties for Mxrt controller, Barco Adapter Configuration

Page 8

Graphic board control panel

installed in your system. This information is used by the Barco MIS Support team when trying to resolve customer issues.

MediCal QAWeb

Clicking on the QA Web button will launch the MediCal QAWeb application. Please refer to the MediCal QAWeb manual for information about this application.

Advanced properties for MXRT controller

To access the advanced properties configuration pages for the display controller(s) for your BARCO NIO FUSION 4MP Display System, click on the Advanced button in the Graphics Device Information section.

There are several pages accessible from the advanced configuration button. They are:

Barco Adapter Configuration

OpenGL

Direct3D

Rotation (when supported)

Details

OpenGL Profiles

Barco Adapter Configuration

The Barco Adapter Configuration page allows you to switch between the following monitor configurations and display options for the displays connected to a Barco MXRT controller:

Display Layout

DualView

Both displays are enabled independent of each other.

SingleView

A single large desktop spans across both displays.

8

Image 8
Contents Nio Fusion 4MP This page intentionally left blank Sources of information User interfaceOverview of product documentation Items in the navigation frameItems in the toolbar frame Graphic board control panel Languages supportedAccessing the Barco tab Using the Barco tabStart Settings Control Panel Display Barco Driver PropertiesDisplay Information Barco system reportBarco Adapter Configuration Advanced properties for Mxrt controllerMediCal QAWeb Display LayoutDisplay Resolution Bit TrueColor Mode Bit TrueColor Mode HDRColor Format Clone Primary display is cloned to the secondary displayMain Settings Custom SettingsOpenGL and Direct3D Wait for Vertical SyncWait for Vertical Sync RotationDevice Details Activating a configuration profile Modifying the configuration parametersOpenGL Profiles Adding a new application profileConfiguring the Windows desktop Graphic board control panel Precautions Optimize the lifetime of your displayUse a screen saver to avoid image retention Understand pixel technologyEnhance user comfort Maximize Quality AssuranceDisplay controls Overview of controlsFront controls are soft touch keys To move down or decrease values in the OSDHow to use the controls To put the display in standby modeTouch the Stand-by touch key Stand-by switchingTo switch from on state to stand-by Info messages Luminance and color menu On-screen display OSDComplete OSD Display Function menu Reading room definition submenu Settings menu Input Switch Mode Select Auto if you wish the display to Changing Display Functions Information menuConcepts InformationDisplay function selection To select a display function DFALC & Dicom Options You can select the following DFsDicom offset IntroductionUse Enter to confirm the selection To select a reading room settingYou can select the following offsets You can select the following reading room types To modify a reading room definitionSwitching Dpms on/off To switch Dpms on/offSwitching Power LED on/off To switch the power LED on/offTo disable the user controls Enabling/disabling User ControlsTo enable the user controls again Barco web sites Visit Barco at Visit Medical Imaging atNovember