Barco Fusion 4MP manual Changing Display Functions, Information menu, Concepts

Page 26

Display information

Information menu

Information

Name	Description

Product	The display type

Serial No	Indicates the display serial number

SW Number	Displays the internal software number

SW Version	Displays the current internal software version

Display Lifetime	Indicates the total time the display has been
	operating, including the time in stand-by

Backlight Lifetime	Indicates the total time the display has been
	operating, excluding the time in stand-by

Changing Display Functions

Concepts

•The Display Function menu lets you select a display function (DF).

•When you select the DICOM DF you can define the DICOM DF to be recalculated taking an ambient light condition into account.

•In this case, the recalculation can be based on an illuminance of 0 lux (“Dark Room”) or a preset value (“Preset”) determined by the selected reading room.

•In the latter case you must select a reading room that corresponds to the type of room the display is installed in. E.g., if the display is installed in a room where CT scans are observed, the “CT/MR/NM” reading room is the preferred selection.

•The reading room is defined by 2 parameters:

26

Image 26

Contents Nio Fusion 4MP This page intentionally left blank Overview of product documentation Sources of informationUser interface Items in the navigation frameItems in the toolbar frame Graphic board control panel Languages supportedStart Settings Control Panel Display Accessing the Barco tabUsing the Barco tab Barco Driver PropertiesDisplay Information Barco system reportMediCal QAWeb Barco Adapter ConfigurationAdvanced properties for Mxrt controller Display LayoutColor Format Display ResolutionBit TrueColor Mode Bit TrueColor Mode HDR Clone Primary display is cloned to the secondary displayOpenGL and Direct3D Main SettingsCustom Settings Wait for Vertical SyncWait for Vertical Sync RotationDevice Details OpenGL Profiles Activating a configuration profileModifying the configuration parameters Adding a new application profileConfiguring the Windows desktop Graphic board control panel Use a screen saver to avoid image retention PrecautionsOptimize the lifetime of your display Understand pixel technologyEnhance user comfort Maximize Quality AssuranceFront controls are soft touch keys Display controlsOverview of controls To move down or decrease values in the OSDHow to use the controls To put the display in standby modeTouch the Stand-by touch key Stand-by switchingTo switch from on state to stand-by Info messages Luminance and color menu On-screen display OSDComplete OSD Display Function menu Reading room definition submenu Settings menu Input Switch Mode Select Auto if you wish the display to Concepts Changing Display FunctionsInformation menu InformationDisplay function selection To select a display function DFDicom offset ALC & Dicom OptionsYou can select the following DFs IntroductionUse Enter to confirm the selection To select a reading room settingYou can select the following offsets You can select the following reading room types To modify a reading room definitionSwitching Dpms on/off To switch Dpms on/offTo disable the user controls Switching Power LED on/offTo switch the power LED on/off Enabling/disabling User ControlsTo enable the user controls again Barco web sites Visit Barco at Visit Medical Imaging atNovember