TRENDnet S4W1CA manual

Contents FCC Warning CE Mark WarningVCCI Warning TABLE OF CONTENTS ABOUT THIS GUIDE INTRODUCTION Broadband Internet access sharingResource sharing File sharingUNPACKING AND SETUP 4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWER HARDWARE INSTALLATIONRESET STATUSConnect the Internet Broadband Router Check the installationPC NETWORK TCP/IP SETTING 1. Right click My Network Places and select Properties INTERNET BROADBAND ROUTER CONFIGURATION The Maximum Idle Time feature can The MTU feature specifies the largest packet size permitted for1-2-1 Dynamic IP Cable Modem If required by your ISP, input a host name and MAC address2-1-2 Administrator Settings Password Settings Advanced Setup1-3 DNS addresses2-1-4 Configuration Tools 2-1-3 Firmware UpgradeRestore Factory Default Backup SettingsIf your ISP is BigPond Australia, check the Enable box 2-1-7 Reset 2-2 WAN2-2-1 Dynamic IP 2-2-2 Static IPService Provider Use Dynamic DNS Check this option to enable Dynamic DNSSelect a Dynamic DNS service provider from the dropdown list 2-2-4 PPTPPassword Enter the username provided by your Dynamic DNS service providerEnter the password provided by your Dynamic DNS service provider 2-3 LAN To set the LAN’s IP Address 2-3-1 LAN SettingsExample 2-5 Firewall To block certain client PCs from accessing the Internet2-5-1 Discard PING from WAN side 2-5-2 Client FilteringTECHNICAL SPECIFICATIONS LIMITED WARRANTY TW100-S4W1CAFive years