TRENDnet S4W1CA manual About This Guide

Contents FCC Warning CE Mark WarningVCCI Warning TABLE OF CONTENTS ABOUT THIS GUIDE File sharing Broadband Internet access sharingINTRODUCTION Resource sharingUNPACKING AND SETUP STATUS HARDWARE INSTALLATION4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWER RESETConnect the Internet Broadband Router Check the installationPC NETWORK TCP/IP SETTING 1. Right click My Network Places and select Properties INTERNET BROADBAND ROUTER CONFIGURATION If required by your ISP, input a host name and MAC address The MTU feature specifies the largest packet size permitted forThe Maximum Idle Time feature can 1-2-1 Dynamic IP Cable Modemaddresses Advanced Setup2-1-2 Administrator Settings Password Settings 1-3 DNSBackup Settings 2-1-3 Firmware Upgrade2-1-4 Configuration Tools Restore Factory Default2-2-2 Static IP 2-1-7 Reset 2-2 WANIf your ISP is BigPond Australia, check the Enable box 2-2-1 Dynamic IP2-2-4 PPTP Use Dynamic DNS Check this option to enable Dynamic DNSService Provider Select a Dynamic DNS service provider from the dropdown list2-3 LAN To set the LAN’s IP Address 2-3-1 LAN Settings Enter the username provided by your Dynamic DNS service providerPassword Enter the password provided by your Dynamic DNS service providerExample 2-5-2 Client Filtering To block certain client PCs from accessing the Internet2-5 Firewall 2-5-1 Discard PING from WAN sideTECHNICAL SPECIFICATIONS LIMITED WARRANTY TW100-S4W1CAFive years