TRENDnet S4W1CA manual Enter the username provided by your Dynamic DNS service provider, Password

Contents CE Mark Warning FCC WarningVCCI Warning TABLE OF CONTENTS ABOUT THIS GUIDE Broadband Internet access sharing INTRODUCTIONResource sharing File sharingUNPACKING AND SETUP HARDWARE INSTALLATION 4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWERRESET STATUSCheck the installation Connect the Internet Broadband RouterPC NETWORK TCP/IP SETTING 1. Right click My Network Places and select Properties INTERNET BROADBAND ROUTER CONFIGURATION The MTU feature specifies the largest packet size permitted for The Maximum Idle Time feature can1-2-1 Dynamic IP Cable Modem If required by your ISP, input a host name and MAC addressAdvanced Setup 2-1-2 Administrator Settings Password Settings1-3 DNS addresses2-1-3 Firmware Upgrade 2-1-4 Configuration ToolsRestore Factory Default Backup Settings2-1-7 Reset 2-2 WAN If your ISP is BigPond Australia, check the Enable box2-2-1 Dynamic IP 2-2-2 Static IPUse Dynamic DNS Check this option to enable Dynamic DNS Service ProviderSelect a Dynamic DNS service provider from the dropdown list 2-2-4 PPTPEnter the username provided by your Dynamic DNS service provider PasswordEnter the password provided by your Dynamic DNS service provider 2-3 LAN To set the LAN’s IP Address 2-3-1 LAN SettingsExample To block certain client PCs from accessing the Internet 2-5 Firewall2-5-1 Discard PING from WAN side 2-5-2 Client FilteringTECHNICAL SPECIFICATIONS TW100-S4W1CA LIMITED WARRANTYFive years