TRENDnet S4W1CA manual Pc Network Tcp/Ip Setting

Contents VCCI Warning FCC WarningCE Mark Warning TABLE OF CONTENTS ABOUT THIS GUIDE Broadband Internet access sharing INTRODUCTIONResource sharing File sharingUNPACKING AND SETUP HARDWARE INSTALLATION 4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWERRESET STATUSCheck the installation Connect the Internet Broadband RouterPC NETWORK TCP/IP SETTING 1. Right click My Network Places and select Properties INTERNET BROADBAND ROUTER CONFIGURATION The MTU feature specifies the largest packet size permitted for The Maximum Idle Time feature can1-2-1 Dynamic IP Cable Modem If required by your ISP, input a host name and MAC addressAdvanced Setup 2-1-2 Administrator Settings Password Settings1-3 DNS addresses2-1-3 Firmware Upgrade 2-1-4 Configuration ToolsRestore Factory Default Backup Settings2-1-7 Reset 2-2 WAN If your ISP is BigPond Australia, check the Enable box2-2-1 Dynamic IP 2-2-2 Static IPUse Dynamic DNS Check this option to enable Dynamic DNS Service ProviderSelect a Dynamic DNS service provider from the dropdown list 2-2-4 PPTPEnter the username provided by your Dynamic DNS service provider PasswordEnter the password provided by your Dynamic DNS service provider 2-3 LAN To set the LAN’s IP Address 2-3-1 LAN SettingsExample To block certain client PCs from accessing the Internet 2-5 Firewall2-5-1 Discard PING from WAN side 2-5-2 Client FilteringTECHNICAL SPECIFICATIONS Five years LIMITED WARRANTYTW100-S4W1CA