TRENDnet S4W1CA manual Internet Broadband Router Configuration

Contents CE Mark Warning FCC WarningVCCI Warning TABLE OF CONTENTS ABOUT THIS GUIDE Resource sharing Broadband Internet access sharingINTRODUCTION File sharingUNPACKING AND SETUP RESET HARDWARE INSTALLATION4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWER STATUSCheck the installation Connect the Internet Broadband RouterPC NETWORK TCP/IP SETTING 1. Right click My Network Places and select Properties INTERNET BROADBAND ROUTER CONFIGURATION 1-2-1 Dynamic IP Cable Modem The MTU feature specifies the largest packet size permitted forThe Maximum Idle Time feature can If required by your ISP, input a host name and MAC address1-3 DNS Advanced Setup2-1-2 Administrator Settings Password Settings addressesRestore Factory Default 2-1-3 Firmware Upgrade2-1-4 Configuration Tools Backup Settings2-2-1 Dynamic IP 2-1-7 Reset 2-2 WANIf your ISP is BigPond Australia, check the Enable box 2-2-2 Static IPSelect a Dynamic DNS service provider from the dropdown list Use Dynamic DNS Check this option to enable Dynamic DNSService Provider 2-2-4 PPTPEnter the password provided by your Dynamic DNS service provider Enter the username provided by your Dynamic DNS service providerPassword 2-3 LAN To set the LAN’s IP Address 2-3-1 LAN SettingsExample 2-5-1 Discard PING from WAN side To block certain client PCs from accessing the Internet2-5 Firewall 2-5-2 Client FilteringTECHNICAL SPECIFICATIONS TW100-S4W1CA LIMITED WARRANTYFive years