TRENDnet S4W1CA manual Dynamic IP Cable Modem, Static IP, PPPoE Dial-up xDSL, Pptp

Contents VCCI Warning FCC WarningCE Mark Warning TABLE OF CONTENTS ABOUT THIS GUIDE File sharing Broadband Internet access sharingINTRODUCTION Resource sharingUNPACKING AND SETUP STATUS HARDWARE INSTALLATION4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWER RESETConnect the Internet Broadband Router Check the installationPC NETWORK TCP/IP SETTING 1. Right click My Network Places and select Properties INTERNET BROADBAND ROUTER CONFIGURATION If required by your ISP, input a host name and MAC address The MTU feature specifies the largest packet size permitted forThe Maximum Idle Time feature can 1-2-1 Dynamic IP Cable Modemaddresses Advanced Setup2-1-2 Administrator Settings Password Settings 1-3 DNSBackup Settings 2-1-3 Firmware Upgrade2-1-4 Configuration Tools Restore Factory Default2-2-2 Static IP 2-1-7 Reset 2-2 WANIf your ISP is BigPond Australia, check the Enable box 2-2-1 Dynamic IP2-2-4 PPTP Use Dynamic DNS Check this option to enable Dynamic DNSService Provider Select a Dynamic DNS service provider from the dropdown list2-3 LAN To set the LAN’s IP Address 2-3-1 LAN Settings Enter the username provided by your Dynamic DNS service providerPassword Enter the password provided by your Dynamic DNS service providerExample 2-5-2 Client Filtering To block certain client PCs from accessing the Internet2-5 Firewall 2-5-1 Discard PING from WAN sideTECHNICAL SPECIFICATIONS Five years LIMITED WARRANTYTW100-S4W1CA