IBM X.25 manual To Verify Installation, Diagnostics

Page 23

ŸIBM Realtime Control Microcode (ICAAIM.COM)

ICAAIM.COM	is	the RAM-resident control program				for	the	PCI
co-processor		adapter	and is	supplied	with	the	Realtime		Interface
Co-Processor Support Program for your operating system.
ICAAIM.COM	is	loaded	automatically onto		the	adapter by			either
the IBM X.25 Co-Processor Support Program or the IBM
Communications		Manager/2	product. ICAAIM.COM optionally
can be loaded using the Application Loader						Utility		of	either the
Realtime Interface Co-Processor DOS Support or the Realtime
Interface Co-Processor OS/2				Support program.

See Appendix A, “Special Configuration Information” for important setup information on creating an ICAPARM.PRM file and changing

the CONFIG.SYS file. The changes are necessary for the correct operation of your PCI co-processor adapter.

Step	3:	Run	Diagnostics		to Verify	Installation
Before		you		continue	with the following procedure, see “PCI
Co-Processor				Adapter	Diagnostics Test” on page 4-3 to test the PCI
co-processor				adapter	in an Intel-based, IBM-compatible system. See
“Step 2. Download the Diagnostics and Operating System Support
Programs”			on	page 2-5	for information on downloading diagnostics
for	other			supported	system	unit hardware platforms.

Installation2-7

Image 23

Contents IBM Page IBM 1996 FirstIii WarrantyExtent of Warranty Liability Vi X.25 Co-Processor PCI GTO Contents PCI Related Publications This Book25 Co-Processor PCI GTO Highlights Product DescriptionSize SpecificationsAdapter Cable Options 4X.25 Co-Processor PCI GTO Hardware Tools Installation RequirementsHardware Handling Static-Sensitive Devices Installation InstructionsInstall the PCI Co-Processor Adapter System Unit 4X.25 Co-Processor PCI GTO Data Bit Downloading from the WWWSystem FileAsk For Software/Microcode InstallationProtocol Diagnostics To Verify InstallationStorm Connect the Optional Adapter CableNot connect or handle Connector Information Pin Assignments Bis 21bis V.35 pin Assignments For 37-pin Connector Chapter Problem DeterminationOptions System Unit DiagnosticsPCI Co-Processor Adapter Diagnostics Test Set the Power switch on the system unit to Off Data Problem Determination Procedures4-5Does Your Screen Match the ONE ABOVE? Problem Determination Procedures4-7 Configuration ScreenColumn CheckReplace Co-Processor Adapter Test YOU FRU and Error Code Table Interface Test Do YOU Want to Test AN Interface V.24, V.35, or X.21? Message at the bottom of the screen will be displayed Co-Processor Adapter Not RecognizedDo YOU Want to Test AN Unrecognized CO-PROCESSOR ADAPTER? ON, or Removal and Replacement ProceduresCo-Processor Adapter Removal Remove the co-processor adapter mounting screw Co-Processor Adapter Replacement Problem Determination Procedures4-21 Asm Part Index Service Parts Assembly 1 PCI Co-Processor AdapterDescription Assembly 2 Cables and Wrap Plugs24X.25 Co-Processor PCI GTO File Appendix A. Special Configuration InformationAddress Considerations BaseArtic For One Co-Processor AdapterISA/PCI ExampleSelecting Ctrl+Alt+Del Reset ConsiderationsLevel For Adapter6X.25 Co-Processor PCI GTO Appendix B To ConnectTo Disconnect Safety InformationUnited Kingdom Telecommunications Act 4X.25 Co-Processor PCI GTO Germany Industry Canada Compliance StatementEuropean Union EU Electromagnetic Compatibility Directive Telekommunikation Korea Trademarks and Service MarksJapan Microcode Customers Like Readers Comments Wed Like to Hear from You Business Reply MailPage IBM