IBM X.25 manual Contents

Contents

About	This	Book	. . . . . . . . . . . . . . . . . . . . .ix
Related Publications. . . .					. . . .	. . .	. ix
Chapter 1.		Product Description			. . . . . . . .			1.-1
Highlights . . . . . . . . . . . . . . .1-1
Specifications. . . . . . . . . . . . . .1-2
Adapter Cable Options. . . . . . . . . . . . . . . . . . .1-.3 . . . .
Chapter 2.		Installation		. . .	. . . . . . . . 2-.1
Installation Requirements								2. -1
Hardware								2.-1
Hardware Tools . . . .					. . . . . . . .			2.-1
Handling Static-Sensitive Devices. . . . . . . . . . . . .2.-2. .
Installation Instructions. . .					. . . . . . . .			2.-2
Step 1: Install the PCI					Co-Processor	Adapter	in the System
Unit					. . . . . . . .			2-.3
Step 2. Download the Diagnostics and Operating System
Support Programs				. . .	. . . . . . . .			2.-5
Step 3: Run Diagnostics to Verify						.Installation. . . . . . 2.-7
Step 4: Connect the Optional Adapter. .Cable. . . . . .2.-8
Chapter 3.		Connector Information			. . . . . . .			3.-1
Pin Numbers			. . . . . . . . . . . . .					.3-1
Pin Assignments			. . . . .		. . . . . . . .3-2
X.21 Connector Information. . . . . . . . . . . . . . . 3.-2. . .
X.21 bis (V.24) Connector Information. . . . . . . . . . .3.-3.
Chapter	4. Problem		Determination Procedures			. . . . . . .4-1

System Unit Diagnostics. . . . . . . . . . . . . . . . . .4.-2. . . .

PCI Co-Processor Adapter Diagnostics. .Test. . . . . . . 4. -3.

Blank Screen, Blinking Cursor, or Non-Decipherable.Data4-5

Configuration Screen . . . . . . . . . . . 4-.7 . . . . . . . . . . .

Configuration Check .		. . . . . . . . . . 4-.8
Co-Processor Adapter Test. . . . . . . . . . . . . . .4-.10. .
FRU and Error Code Table. . . . . . . . . . . . . . .4-.12. .
Interface Test. . .		. . . . . . . . . 4. -13
Co-Processor	Adapter	Not Recognized. . . . . . . . . .4-.15
 Copyright IBM	Corp. 1996	vii