IBM X.25 manual Does Your Screen Match the ONE ABOVE?

à	IBM REALTIME INTERFACE CO-PROCESSOR							ð
	AND X.25 INTERFACE CO-PROCESSOR
	_____________________________________________________
	PRESENT		STG	PWR	L	B PORTS
	____	CARD	SIZE	ON	V	U	__________
	CARD	ADDR	KB	ERR	L	S	ADAPTER
	_____________________________________________
_____________________________________________
	ARE ALL	REALTIME	INTERFACE
	CO-PROCESSORS RECOGNIZED
á	(Y/N)?							ñ

DOES YOUR SCREEN MATCH THE ONE ABOVE?

NO Continue to the next page.

YES Do the following:

ŸIf all your co-processor adapters have been removed, turn

off your system and continue with step 2 below.

ŸIf more than one co-processor adapter is installed in your

system, turn		off		your		system and do the following:
1. Remove	all		of the			installed co-processor adapters.
2. Re-install and				test		one co-processor adapter at a time
by doing the following. (Replace the adapter that
causes	the		failure.)
a. Re-install				the	adapter.
b. Then		restart			the diagnostics (see page 4-4).
Note:		You	may return to this page with only one
		adapter			installed; in this case, continue
		with		the	following.

ŸIf only one co-processor adapter isN installed,and press then Enter; continue on page 4-15.

4-6X.25 Co-Processor PCI GTO