IBM X.25 manual Do YOU Want to Test AN Interface V.24, V.35, or X.21?

Page 42

DO YOU WANT TO TEST AN INTERFACE (V.24, V.35, OR X.21)?

Note:

You

can

test the

PCI

co-processor adapter

with

or

without the

 

37-pin wrap plug (shown

in “Cables and Wrap Plugs” on

 

 

page 4-23). The wrap plug lets you test the electrical

 

interfaces.

 

 

 

 

 

 

NO

Press 9; then

press

Enter and go to page 4-10.

 

 

YES

Press

one

of

the

following numbers (displayed

in

the

Ports

 

column):

 

 

 

 

 

 

 

 

0

to

test

the

V.24

interface

 

 

 

 

1 to

test

the

V.35

interface.

 

 

 

2to test the X.21 interface. Continue on page 4-14.

Questions

will be displayed on your screen. Answer the questions

 

and

respond

to

the

prompts.

 

 

 

If

you

are

instructed

to remove the cable and connect a wrap

plug to

the

card, be

sure

you

connect the

interface

co-processor wrap

plug

to

the

co-processor adapter being tested.

 

 

Note:

The

cable

wrap

plug

connects to

the cable

only.

 

Do the following if you receive an error code:

1.Record the co-processor adapter card address.

2.Record the error code.

3.See page 4-12.

Otherwise,

upon

completion

of the interface test,

continue

on the

next page.

 

 

 

 

 

When the tests have completed for the interface

being

tested, the

message at

the

bottom of

the following screen is

displayed.

4-14X.25 Co-Processor PCI GTO

Page 41 Page 43
Image 42
Page 41 Page 43
Contents IBM Page IBM First 1996Warranty IiiExtent of Warranty Liability Vi X.25 Co-Processor PCI GTO Contents PCI This Book Related Publications25 Co-Processor PCI GTO Product Description HighlightsSpecifications SizeAdapter Cable Options 4X.25 Co-Processor PCI GTO Installation Requirements HardwareHardware Tools Installation Instructions Handling Static-Sensitive DevicesInstall the PCI Co-Processor Adapter System Unit 4X.25 Co-Processor PCI GTO File Downloading from the WWWSystem Data BitSoftware/Microcode Installation ProtocolAsk For To Verify Installation DiagnosticsConnect the Optional Adapter Cable Not connect or handleStorm Connector Information Pin Assignments Bis 21bis V.35 pin Assignments For 37-pin Connector Problem Determination ChapterSystem Unit Diagnostics OptionsPCI Co-Processor Adapter Diagnostics Test Set the Power switch on the system unit to Off Problem Determination Procedures4-5 DataDoes Your Screen Match the ONE ABOVE? Configuration Screen Problem Determination Procedures4-7Check ColumnReplace Co-Processor Adapter Test YOU FRU and Error Code Table Interface Test Do YOU Want to Test AN Interface V.24, V.35, or X.21? Co-Processor Adapter Not Recognized Message at the bottom of the screen will be displayedDo YOU Want to Test AN Unrecognized CO-PROCESSOR ADAPTER? Removal and Replacement Procedures ON, orCo-Processor Adapter Removal Remove the co-processor adapter mounting screw Co-Processor Adapter Replacement Problem Determination Procedures4-21 Service Parts Assembly 1 PCI Co-Processor Adapter Asm Part IndexAssembly 2 Cables and Wrap Plugs Description24X.25 Co-Processor PCI GTO Appendix A. Special Configuration Information FileBase Address ConsiderationsFor One Co-Processor Adapter ArticExample ISA/PCIAdapter Ctrl+Alt+Del Reset ConsiderationsLevel For Selecting6X.25 Co-Processor PCI GTO Appendix B Safety Information To ConnectTo DisconnectUnited Kingdom Telecommunications Act 4X.25 Co-Processor PCI GTO Industry Canada Compliance Statement European Union EU Electromagnetic Compatibility DirectiveGermany Telekommunikation Trademarks and Service Marks JapanKorea Microcode Customers Like Business Reply Mail Readers Comments Wed Like to Hear from YouPage IBM
Top Page Image Contents