IBM X.25 manual Replace

à										ð
	IBM	REALTIME INTERFACE CO-PROCESSOR
	AND	X.25 INTERFACE CO-PROCESSOR
_____________________________________________________
	PRESENT			STG	PWR	L	B	PORTS
____			CARD	SIZE	ON	V	U		__________
	CARD		ADDR	KB	ERR	L	S		ADAPTER
_____________________________________________
ð		Y	ð2Að	512		1ð	32	1	V24/V35
									X21
_____________________________________________

ARE ALL REALTIME INTERFACE CO-PROCESSORS RECOGNIZED (Y/N)?

CHECK THE REALTIME INTERFACE CO-PROCESSOR CONFIGURATION -> PRESS ENTER

á			ñ
DOES	THE	CONFIGURATION	INFORMATION IN EACH COLUMN
MATCH	THE	SETTINGS IN	YOUR CONFIGURATION?

NO Continue to the next page.

YES Press Enter and continue to page 4-10 to perform a complete diagnostic checkout.

If an error	is displayedPWR ON ERR in thecolumn,		replace the
co-processor	adapter	that caused the failure and rerun the PCI
co-processor	adapter	diagnostics (page	4-4).

Otherwise, check the settings of the switches on the adapters, as explained in Chapter 3, “Connector Information.”

If the switches are wrong, correct them and repeat the PCI co-processor adapter diagnostics.

Problem Determination Procedures4-9