IBM X.25 manual System Unit Diagnostics, Options

System Unit Diagnostics

For details on performing the system unit diagnostics, see “Problem Determination Procedures” in the operating instructions supplied with your computer system.

The system unit diagnostics will					not detect	PCI co-processor adapter
errors	directly,	but	will	aid	in isolating	the problem.
Run the Realtime Interface Co-Processor diagnostics to determine
whether	or not	you	have	a PCI	co-processor adapter error.

Note: If you are unsure of a problem area, perform the system unit diagnostics first, before proceeding with the PCI co-processor adapter diagnostics.

If

you

encounter

problems

configuring

your PCI

co-processor

adapter

or

installing the IBM X.25

Interface

Co-Processor PCI device driver

for your operating system, you may

need to update the BIOS on your

computer. Contact your system unit manufacturer

for

any

possible

BIOS

updates.

The IBM X.25 Interface Co-Processor

PCI

adapter

requests

an 8KB

memory

window

under

1MB. If this is

not

available,

the

software for

the

card

may

not

operate

correctly.

If you are unable to resolve your problem, contact the ARTIC Technical Support Desk as follows:

ŸIn the USA,1-call800-237-5511 , and at the Voice Response

	Unit,	enter0 (ignore all other	options) .
Ÿ	In Canada, 1call-800-465-2222		.
Ÿ	For all	other locations,	call your country specialists.

4-2X.25 Co-Processor PCI GTO