IBM X.25 manual Configuration Screen, Problem Determination Procedures4-7

A screen similar to the following may appear.

àð

_______________________________________________________________

IBM REALTIME INTERFACE CO-PROCESSOR AND X.25 INTERFACE CO-PROCESSOR CARD ADDR = ð2Að

WERE YOU DIRECTED HERE FROM THE PROBLEM ISOLATION CHARTS BECAUSE THE YELLOW LIGHT WAS BLINKING

(Y/N)?

_______________________________________________________________

á ñ

DOES YOUR SCREEN LOOK SIMILAR TO THIS ONE?

NO Continue to the next page.

YES Replace the co-processor adapter.

Configuration Screen

Configuration information for all installed co-processor adapters should appear on the screen. If a screen with an error message appears, follow the instructions on the screen.

Notes:

1.The Realtime Interface Co-Processor Advanced Diagnostics are configured to test up to a maximum of four co-processor

adapters		(including the PCI co-processor adapter) at a time. If
you	have	more than four adapters, ensure that only four at a
time	are	installed.

2.The following screen is only a representation of the configuration screen that should be displayed. Your screen may differ, depending on your co-processor adapter configuration.

Problem Determination Procedures4-7