IBM X.25 manual Connect the Optional Adapter Cable, Not connect or handle, Storm

Page 24

Step 4: Connect the Optional Adapter Cable

Use the following steps to connect your adapter cable.

Note: The optional adapter cables are described on page 1-3.

DANGER

Lightning protection. Do	not connect or handle the
cable during a lightning	storm.

1.Align the connector of the adapter cable with the co-processor adapter connector at the rear of the system unit; it can fit properly only one way.

2.Firmly press the adapter cable onto the co-processor adapter connector.

3.Insert and tighten the screw at each side of the connector on the cable.

4. Connect your device to the other end of the adapter cable.

The PCI co-processor adapter hardware installation is complete.

2-8X.25 Co-Processor PCI GTO

Image 24

Contents IBM Page IBM First 1996Warranty IiiExtent of Warranty Liability Vi X.25 Co-Processor PCI GTO Contents PCI This Book Related Publications25 Co-Processor PCI GTO Product Description HighlightsSpecifications SizeAdapter Cable Options 4X.25 Co-Processor PCI GTO Installation Requirements HardwareHardware Tools Installation Instructions Handling Static-Sensitive DevicesInstall the PCI Co-Processor Adapter System Unit 4X.25 Co-Processor PCI GTO Downloading from the WWW SystemFile Data BitSoftware/Microcode Installation ProtocolAsk For To Verify Installation DiagnosticsConnect the Optional Adapter Cable Not connect or handleStorm Connector Information Pin Assignments Bis 21bis V.35 pin Assignments For 37-pin Connector Problem Determination ChapterSystem Unit Diagnostics OptionsPCI Co-Processor Adapter Diagnostics Test Set the Power switch on the system unit to Off Problem Determination Procedures4-5 DataDoes Your Screen Match the ONE ABOVE? Configuration Screen Problem Determination Procedures4-7Check ColumnReplace Co-Processor Adapter Test YOU FRU and Error Code Table Interface Test Do YOU Want to Test AN Interface V.24, V.35, or X.21? Co-Processor Adapter Not Recognized Message at the bottom of the screen will be displayedDo YOU Want to Test AN Unrecognized CO-PROCESSOR ADAPTER? Removal and Replacement Procedures ON, orCo-Processor Adapter Removal Remove the co-processor adapter mounting screw Co-Processor Adapter Replacement Problem Determination Procedures4-21 Service Parts Assembly 1 PCI Co-Processor Adapter Asm Part IndexAssembly 2 Cables and Wrap Plugs Description24X.25 Co-Processor PCI GTO Appendix A. Special Configuration Information FileBase Address ConsiderationsFor One Co-Processor Adapter ArticExample ISA/PCICtrl+Alt+Del Reset Considerations Level ForAdapter Selecting6X.25 Co-Processor PCI GTO Appendix B Safety Information To ConnectTo DisconnectUnited Kingdom Telecommunications Act 4X.25 Co-Processor PCI GTO Industry Canada Compliance Statement European Union EU Electromagnetic Compatibility DirectiveGermany Telekommunikation Trademarks and Service Marks JapanKorea Microcode Customers Like Business Reply Mail Readers Comments Wed Like to Hear from YouPage IBM