Fujitsu 5000 Installing internal options to 3.5-inch expansion bays, Set the internal option

Page 47

■Installing internal options to 3.5-inch expansion bays

■Installing internal options to 3.5-inch expansion bays

This section explains how to install 3.5-inch expansion bay options such as a 3.5-inch internal hard disk, magneto-optic disk drive, and 3.5-inch floppy disk drive. A magneto-optic disk drive is used below in an installation example.

1

2

Set the internal option.

See the manual accompanying the internal options to set the following items.

-To install an IDE-standard internal option: Set the master, slave, and cable selection.

-To install a SCSI interface internal option: Set the SCSI ID.

If retaining metal brackets are mounted on

both sides of the internal hard disk to be

installed, remove them.

Remove the screws (four) to remove the retaining metal brackets.

OFF

P

Q

R

S

T

U

V

W

3

4

Remove the upper cover.

Remove the front panel.

The front panel does not need to be removed when installing a hard disk.

5 Remove the blank panel.

Remove the screw (one) to remove the blank panel.

The blank panel does not need to be removed when installing a hard disk.

37

Image 47

Contents DESKPOWER 5000 Series User’s Manual IMPORTANT SAFETY INSTRUCTIONS Greetings Representing keys and use thereof Command entriesConventions used in this manual Warning iconsCustom-made options Conventions used in the text of the manualScreen display examples IllustrationsRear of the PC main unit Inside the PC main unit Warning and caution labelsChapter 4 Troubleshooting Manual configurationChapter 1 Installation and Connection Chapter 3 Installing Internal OptionsSwitching off ContentInstallation Switching onError Messages Installing Memory ModulesInstalling Expansion Cards Installing Expansion Bay OptionsSupplement Standard SpecificationsCleaning Method 1 Name and Function of Each Componentand explains how to connect various cables Chapter 1 Installation and Connection⁄ Point 1 InstallationInstallation location Example of installing the PCPreventing electromagnetic interference with a TV or radio Precautions to be taken by the PC userPrecautions to be taken by the TV or radio 2 Connection Connect the CRT cable to the PC main unit Attaching CRT display, keyboard, mouse, and LAN cables ⁄ PointConnect the power cord to the CRT display the rear of the CRT display Connect the power cord to the outletDo not plug or unplug the power cord with wet hands Connecting the power cordUpon completion of all connections power on and off and handle storage media Chapter 2 Basic OperationsPress the power switch of the PC main unit 1 Switching onPress the power switch of the CRT display Wait about 10 seconds before switching the PC on or off again 1 Click Start 2 Switching offTurning off the power via Windows 2 Click Shut Down Turning off the power via Windows NT1 Click Start and Shut Down 3 ResetResetting the PC via Windows Resetting the PC via Windows NTSelect Restart and click OK Click Start and Shut DownMounting a floppy disk Handling precautions4 Floppy Disk Mounting and dismounting a floppy disk2 Press the floppy disk eject button 1 Confirm that the floppy disk access indicator lamp is offDismounting a floppy disk 5 CD-ROM 1 Press the EJECT button. The CD-ROM tray is ejected Mounting and dismounting a CD-ROM diskMounting a CD-ROM Dismounting a CD-ROM6 Hard Disk What is a hard disk?Chapter 3 Installing Internal Options 1 Introduction Installing positions of internal options 2 Remove the upper cover Removing the upper coverRemoving the front panel 1 Remove three screws at the rear of the PC main unitDIMM DIMM 2 Installing Memory Modules2 Push down the hooks at both ends of the slot Installing an additional memoryMemory 1 Remove the upper cover3 Attach the upper cover Removing the memory3 Installing Expansion Cards Expansion cards for PCI bus Plug & Play compatible cards Turning on the PC after installing the Expansion card installation procedure for a PC using WindowsWindows NT Expansion card installation procedure for a PC using1 If the PC is turned on, turn it off Starting and terminating the ICU For a PC using Windows NTSet up the resources Select the Exit command and press the Enter keyRemove the slot cover Installing an expansion cardSlide the motherboard for installing a small expansion card Insert the expansion card into the connectorfor installing a large expansion card Install the motherboard when a largeexpansion card has been installed 8 Install the retaining metal bracket at the side4 Installing Expansion Bay Options genuine internal options in the PC expansion bay both sides of the internal hard disk to be replaced, remove them Set up the jumper switchReplacing a internal hard disk equipped as standard If retaining metal brackets are mounted on8 Connect the cables to the hard disk 7 Install the internal hard disk in the PC main unit9 Attach the upper cover 10 Use BIOS setup to set the hard disk 6 Replace the internal hard diskRemove the upper cover Remove the front panel Installing internal options to 3.5-inch expansion baysboth sides of the internal hard disk to be installed, remove them Set the internal option6 Remove the retaining metal bracket from the PC main unit 7 Install a internal option in the retaining metal bracket8 Install the internal option in the PC main unit 9 Connect the flat cable 10 Connect the power cord12 Attach the upper cover 13 Use BIOS setup to configure the internal option11 Attach the front panel 5 Insert the internal option from the front side of the PC main unit Installing internal options to 5-inch expansion bays1 Configure the internal option Secure the internal option with two screws Connect the flat cable Hook 8 Connect the power corddismounted 10 Attach the front panelAttach the upper cover Use BIOS setup to configure the internal optionas expected Chapter 4 TroubleshootingDescription and necessary action 1 Error MessagesError messages displayed by the PC Error MessageTo boot booting the OS, press the F1 key. To run the BIOS Description and necessary action Correcting errors The screen flickers 2 TroubleshootingThe access lamp does not light up No data is displayed on the screendoes not light up Troubleshooting information on WindowsThe power is not turned on or the Power lamp on the front panel Characters entered using the keyboard are not displayedThe mouse is disabled and Windows 98 cannot end If an error recursspecifications AppendixThis appendix explains how to clean the PC and provides PC main unit Front of the PC main unit 1 Name and Function of Each ComponentMicrophone terminal Inlet Rear of the PC main unitPower-switching switch Outlet Ventilation holesMONITOR Connect the CRT cable Internal hard disk Inside the PC main unitPower supply unit 3.5-inch expansion bay Riser boardPrimary IDE connector Motherboard/riser boardCPU JP3 jumper switch Internal batteryProduct name 2 Standard SpecificationsPC main unit specifications DESKPOWERNumber of Storage Intel LAN adapter specificationsSound specifications LAN controllerSignal name Connector specificationsCRT connector LAN connector 100BASE-TX/10BASE-TSerial connector Parallel connectorUSB connector SeriesA Mouse connectorKeyboard connector Cleaning a CD-ROM 3 Cleaning MethodCleaning the PC main unit Cleaning the keyboardFor Windows 9X/NT model Cleaning a floppy disk driveRemove the ball and clean with water Clean the inside of the mouse4 Supplement Note on using the displayNote on using an analog liquid crystal display Display disturbed when the screen mode is changedprinter, modem, and speaker interfaces About USB Windows 98/2000LAN Adapter Power Saving FunctionWake up On LAN LAN CableMouse with scroll functionwheel CD-ROM driveIntel processor serial number Tel 603-253 Fax 603-253 Tel 65-776 Fax 65-7768th Floor Wisma Damansara Jalan Semantan 50490 Kuala Lumpur Malaysia

Related manuals

Manual 72 pages 40.94 Kb