Fujitsu BX960 S1 manual Technical data Certification, Mechanical specifications, Weight

Page 19

Technical data

Certification

Product safety approved with the PRIMERGY BX900 S1 system unit

Global	CB

Germany	GS, CE

USA/Canada	CSAUS/CSAC
Japan	VCCI

China/Taiwan	BSMI

Mechanical specifications

Width

Depth

Height

Weight

45mm

508mm

420mm (2 bays in the system unit)

Max. 12.4 kg (depending on the configuration).

Ambient conditions

Environment class 3K2	EN 60721 / IEC 721 Part 3-3
Environment class 2K2	EN 60721 / IEC 721 Part 3-2

Temperature:
Operation (3K2)	5 ºC ... 35 ºC
Transport (2K2)	-20 °C ... 60 °C

Humidity	10% ... 85% (non condensing)

Condensation during operation must be avoided!

BX960 S1

Operating Manual

19

Image 19

Contents Primergy BX960 S1 Server Blade Certified documentation according to DIN EN ISO Comments… Suggestions… Corrections…Aluminum electrolytic capacitors For your safetyHigh safety use Radio interferenceHarmonic Current Standards Measures against momentary voltage dropOnly for the Japanese market About Sata hard disk drives Only for the Japanese market Operating Manual Contents Contents Concept and target groups for this manual IntroductionDocumentation overview Documentation overviewPerformance features Further sources of information Performance featuresCustomer Self Service CSS Slots for expansion cards Performance featuresSystem board Trusted Platform Module TPMExternal ports SSD drivesSATA-RAID support Graphics controllerIRMC S2 with integrated management LAN connector Server management Service and support Performance features ServerView Installation ManagerNotational conventions Notational conventionsCompliance with regulations and standards Technical dataTechnical data Electrical dataAmbient conditions Technical data CertificationMechanical specifications WeightTechnical data Overview Installation steps BX960 S1 Important notes Safety instructionsInstallation and operation Safety instructions Before starting upSafety instructions Safety instructions Batteries Operating Manual Never remove parts of the optical drive casing Laser informationESD label CE conformity Other important information CE conformityFCC class a device Transporting the Server BladePackaging information Environmental protectionEnvironmentally-friendly product design and development Energy-saving informationLabels on plastic casing parts Environmental protectionReturns, recycling and disposal Minimum acclimatization time Installing the hardwareHours Unpacking the server Installing the Server Blade in the system unitUnpacking the server Removing the server blade dummy module Installing the Server Blade Installing the Server BladeConnecting devices Connecting devicesSAN Disconnecting cables Instructions for connecting/disconnecting cablesInstructions for connecting/disconnecting cables Connecting cablesInstructions for connecting/disconnecting cables Control and display elements Installation and operationLEDs on the control panel Control and display elements Control elementsCSS Control and display elementsID card Other On/Off options After power failure Switching the Server Blade on and offSwitching the Server Blade on and off Defined switch-on/off timeConfiguring the Server Blade Configuring the Server BladeAdvantages of the ServerView Installation Manager Installing the operating system Onboard Sata controller, configuringCleaning the Server Blade Cleaning the Server BladeCleaning the Server Blade Property and data protection Bios Setup security functionsPreventing unauthorized Bios Setup calls Preventing unauthorized system accessProtecting the server from being switched off by a program Protecting Bios from being overwrittenMonitor is switched off Troubleshooting and tipsServer switches itself off Server Management has detected an errorBrightness control is set to dark Power cable or monitor cable not connectedFlickering stripes on monitor screen1 Flickering stripes on monitor screen Screen has gone blankIncorrect date and time System will not bootSAS configuration incorrect No screen display or display drifts1RAID controller configuration incorrect Hard disk drive error messages at system bootAdded drive reported as defective Error message on screenRAID controller is not configured for this drive Added drive reported as defectiveError message on screen Replacing CSS components SSD drive SSD driveRemoving the server blade from the system unit Opening the server bladeRemoving the cover SSD drive Removing the coverRemoving an SSD drive Replacing the SSD driveRemoving the SSD drive mounting frame Fitting the SSD drive into the guide element SSD drive Installing an SSD driveInserting the SSD drive in the mounting frame Installing the mezzanine cards carrier Closing the server blade Index BiosCSS Index FaultUFM IndexWeight Operating Manual