Fujitsu BX960 S1 manual Added drive reported as defective, Error message on screen

Page 57

Added drive reported as defective

7.8Added drive reported as defective

RAID controller is not configured for this drive

The drive was probably installed when the system was switched off.

ÊReconfigure the RAID controller for the drive using the corresponding utility. Information is provided in the documentation for the RAID controller.

or

ÊRemove and reinstall the drive while the system is switched ON.

If the drive continues to be shown as defective, then replace it (see "SSD drive" on page 60).

7.9Error message on screen

The meaning of the error message is explained in the documentation for the relevant components and programs on the ServerView Suite DVD 2.

BX960 S1

Operating Manual

57

Image 57

Contents Primergy BX960 S1 Server Blade Certified documentation according to DIN EN ISO Comments… Suggestions… Corrections…High safety use For your safetyRadio interference Aluminum electrolytic capacitorsMeasures against momentary voltage drop Harmonic Current StandardsOnly for the Japanese market About Sata hard disk drives Only for the Japanese market Operating Manual Contents Contents Concept and target groups for this manual IntroductionDocumentation overview Documentation overviewPerformance features Performance features Further sources of informationCustomer Self Service CSS System board Performance featuresTrusted Platform Module TPM Slots for expansion cardsSATA-RAID support SSD drivesGraphics controller External portsIRMC S2 with integrated management LAN connector Server management Service and support Performance features ServerView Installation ManagerNotational conventions Notational conventionsTechnical data Technical dataElectrical data Compliance with regulations and standardsMechanical specifications Technical data CertificationWeight Ambient conditionsTechnical data Overview Installation steps BX960 S1 Important notes Safety instructionsInstallation and operation Safety instructions Before starting upSafety instructions Safety instructions Batteries Operating Manual Never remove parts of the optical drive casing Laser informationESD label FCC class a device CE conformityTransporting the Server Blade CE conformity Other important informationEnvironmentally-friendly product design and development Environmental protectionEnergy-saving information Packaging informationEnvironmental protection Labels on plastic casing partsReturns, recycling and disposal Installing the hardware Minimum acclimatization timeHours Installing the Server Blade in the system unit Unpacking the serverUnpacking the server Removing the server blade dummy module Installing the Server Blade Installing the Server BladeConnecting devices Connecting devicesSAN Instructions for connecting/disconnecting cables Instructions for connecting/disconnecting cablesConnecting cables Disconnecting cablesInstructions for connecting/disconnecting cables Control and display elements Installation and operationLEDs on the control panel Control and display elements Control elementsCSS Control and display elementsID card Switching the Server Blade on and off Switching the Server Blade on and offDefined switch-on/off time Other On/Off options After power failureConfiguring the Server Blade Configuring the Server BladeAdvantages of the ServerView Installation Manager Installing the operating system Onboard Sata controller, configuringCleaning the Server Blade Cleaning the Server BladeCleaning the Server Blade Preventing unauthorized Bios Setup calls Bios Setup security functionsPreventing unauthorized system access Property and data protectionProtecting the server from being switched off by a program Protecting Bios from being overwrittenServer switches itself off Troubleshooting and tipsServer Management has detected an error Monitor is switched offFlickering stripes on monitor screen1 Power cable or monitor cable not connectedFlickering stripes on monitor screen Screen has gone blank Brightness control is set to darkSAS configuration incorrect System will not bootNo screen display or display drifts1 Incorrect date and timeRAID controller configuration incorrect Hard disk drive error messages at system bootRAID controller is not configured for this drive Error message on screenAdded drive reported as defective Added drive reported as defectiveError message on screen Replacing CSS components SSD drive SSD driveRemoving the server blade from the system unit Opening the server bladeRemoving the cover SSD drive Removing the coverRemoving an SSD drive Replacing the SSD driveRemoving the SSD drive mounting frame Fitting the SSD drive into the guide element SSD drive Installing an SSD driveInserting the SSD drive in the mounting frame Installing the mezzanine cards carrier Closing the server blade Index BiosCSS Index FaultUFM IndexWeight Operating Manual