Installing the Server Blade in the system unit
Removing dummy modules
Any unused slots on the front of the system unit are fitted with appropriate dummy modules to comply with electromagnetic compatibility (EMC) regulations and to ensure sufficient cooling of the system components.
To add a BX960 S1 server blade, you must first remove dummy modules from the relevant slots.
Figure 2: Removing the server blade dummy module
ÊPull up the handle of the dummy module (arrow) to unlock it.
ÊPull the dummy module out of the slot.
VCAUTION!
Keep the dummy module for future use. If you remove a server blade and do not replace it with a new one, you must install a dummy module to comply with the regulations regarding electromagnetic compatibility and to ensure sufficient cooling of the system components.
BX960 S1 | Operating Manual | 35 |