Fujitsu BX960 S1 manual Safety instructions Batteries

Page 26

Safety instructions

Batteries

VCAUTION!

●Incorrect replacement of batteries may lead to a risk of explosion. The batteries may only be replaced with identical batteries or with a type recommended by the manufacturer (see the technical manual for the system board).

●Do not throw batteries into the trash can.

●Batteries must be disposed of in accordance with local regulations concerning special waste.

●Replace the lithium battery on the system board in accordance with the instructions in the technical manual for the system board.

●All batteries containing pollutants are marked with a symbol (a crossed-out garbage can). In addition, the marking is provided with the chemical symbol of the heavy metal decisive for the classification as a pollutant:

Cd Cadmium Hg Mercury Pb Lead

26

Operating Manual

BX960 S1

Image 26

Contents Primergy BX960 S1 Server Blade Comments… Suggestions… Corrections… Certified documentation according to DIN EN ISORadio interference For your safetyHigh safety use Aluminum electrolytic capacitorsOnly for the Japanese market About Sata hard disk drives Measures against momentary voltage dropHarmonic Current Standards Only for the Japanese market Operating Manual Contents Contents Introduction Concept and target groups for this manualDocumentation overview Documentation overviewCustomer Self Service CSS Performance featuresPerformance features Further sources of information Trusted Platform Module TPM Performance featuresSystem board Slots for expansion cardsGraphics controller SSD drivesSATA-RAID support External portsIRMC S2 with integrated management LAN connector Server management Performance features ServerView Installation Manager Service and supportNotational conventions Notational conventionsElectrical data Technical dataTechnical data Compliance with regulations and standardsWeight Technical data CertificationMechanical specifications Ambient conditionsTechnical data Overview Installation steps BX960 S1 Safety instructions Important notesSafety instructions Before starting up Installation and operationSafety instructions Safety instructions Batteries Operating Manual Laser information Never remove parts of the optical drive casingESD label Transporting the Server Blade CE conformityFCC class a device CE conformity Other important informationEnergy-saving information Environmental protectionEnvironmentally-friendly product design and development Packaging informationReturns, recycling and disposal Environmental protectionLabels on plastic casing parts Hours Installing the hardwareMinimum acclimatization time Unpacking the server Installing the Server Blade in the system unitUnpacking the server Removing the server blade dummy module Installing the Server Blade Installing the Server BladeConnecting devices Connecting devicesSAN Connecting cables Instructions for connecting/disconnecting cablesInstructions for connecting/disconnecting cables Disconnecting cablesInstructions for connecting/disconnecting cables Installation and operation Control and display elementsControl and display elements Control elements LEDs on the control panelControl and display elements CSSID card Defined switch-on/off time Switching the Server Blade on and offSwitching the Server Blade on and off Other On/Off options After power failureConfiguring the Server Blade Configuring the Server BladeAdvantages of the ServerView Installation Manager Onboard Sata controller, configuring Installing the operating systemCleaning the Server Blade Cleaning the Server BladeCleaning the Server Blade Preventing unauthorized system access Bios Setup security functionsPreventing unauthorized Bios Setup calls Property and data protectionProtecting Bios from being overwritten Protecting the server from being switched off by a programServer Management has detected an error Troubleshooting and tipsServer switches itself off Monitor is switched offFlickering stripes on monitor screen Screen has gone blank Power cable or monitor cable not connectedFlickering stripes on monitor screen1 Brightness control is set to darkNo screen display or display drifts1 System will not bootSAS configuration incorrect Incorrect date and timeHard disk drive error messages at system boot RAID controller configuration incorrectAdded drive reported as defective Error message on screenRAID controller is not configured for this drive Added drive reported as defectiveError message on screen Replacing CSS components SSD drive SSD driveOpening the server blade Removing the server blade from the system unitSSD drive Removing the cover Removing the coverReplacing the SSD drive Removing an SSD driveRemoving the SSD drive mounting frame SSD drive Installing an SSD drive Fitting the SSD drive into the guide elementInserting the SSD drive in the mounting frame Installing the mezzanine cards carrier Closing the server blade Bios IndexIndex Fault CSSIndex UFMWeight Operating Manual