Fujitsu TX150 S3 manual Extending/replacing the main memory

Extending/replacing the main memory Main memory

The table below shows the order in which the memory banks must be equipped:

	DIMM_1A	DIMM_2A	DIMM_1B	DIMM_2B
single channel	equipped	empty	empty	empty
	empty	equipped	empty	empty
	empty	empty	equipped	empty
	empty	empty	empty	equipped
dual channel	equipped	empty	equipped	empty
	empty	equipped	empty	equipped
	equipped	equipped	equipped	equipped

5.2Extending/replacing the main memory

ÊOpen the server as described in the chapter “Preparation” on page 13 et seqq. .

2

1

1

Figure 13: Removing a memory module

ÊPress the holders on either side of the mounting location concerned outward

(1).

ÊIf the mounting location was already equipped: pull the memory module out of the mounting location (2).

22 Options Guide U41604-Z156-1-76