2 Setting double feed detection (Paper Length)
1. Press | Screen=! 0N2 | 2o / YL | e | ns | g | t1 /h | 2 :C | Shet oc kp |
or | and let the scanner display Screen 2. |
| ||||||
2. Press either the 
or 
button to set double feed detection according to paper length. The paper length is checked using the difference between two consecutive sheets of paper fed from the ADF.
Each time either of these buttons is pressed, the location of the blinking moves. When the 
button is pressed, the blinking moves from (1) to (3). When the 
button is pressed, the blinking moves in the opposite direction. However, if the setting by the host computer is valid, the location of the blinking does not move when either button is pressed.
(1) “No” is blinking: Paper length is not checked.
(2) “Yes” and “1” are blinking: Paper length is checked. However, a detected double feed error is displayed only on the screen; processing is continued.
(3) “Yes” and “2: Stop” are blinking: Paper length is checked. When the double feed error is detected, the!scan0processing2 - 1 is stoppedL e. Then gerrortis hthen reported to the host.
If you want to disable= 1the0double/ feed,5select/ 2“No0” then pressmm 
. Press 
to return.
After pressing 
, the scanner displays the Screen 3. Screen 3
3.Press either the 
or 
button to set double feed detection (paper length). When the 
button is pressed, the blinking moves from (1) to (3). When the 
button is pressed, the blinking moves in the opposite direction.
(1)The “10” is blinking: Threshold is 10mm
(2)The “15” is blinking: Threshold is 15mm
(3)The “20” is blinking: Threshold is 20mm
●