Fujitsu fi-4340C manual ScreenR! 1i43 8g -h t5 = F B0 mmR i g ht, Adjust FB Erasing Edges

16Adjust FB Erasing Edges

1.Press “Next” orC!“Previous18h a nge” FBand let?theEscannerdNgeo/displayERYeScreenSs38. Screen 38

2.At Screen 38, press! 1or8-to select1 “YesD”eandfNpressao /uYl . Thenet s?the scanner displays Screen 39. Screen 39

3.At Screen 39, selectT! “18oYesp=” to-return2the0settingsFmBmto theTfactoryo pdefault or select “No” to make new

settings (as shown below). Then press . The scanner displays Screen 40. Screen 40

4.At Screen 40, pressB! 1torm8=-to change3 0 theFmtopBmsetting( B+. The:o Utvaluep)tchangesm in 1 mm units. Then press

to activate the setting. The scanner displays Screen 41. Screen 41

5.At Screen 41, press! 1or8-to change4 Fthe Bbottom Lsettingeft. With (+:Up), the area is set upward from the bottom edge ofLtheefimaget=. With (–:Down),0mthemarea is set downward from the bottom edge of the

image. The value changes in 1 mm units. Then press to activate the setting. The scanner displays Screen 42.

Screen 42

6.At Screen 42, press or to change the left setting. The value changes in 1 mm units. Then press

to activate the setting. The scanner displays Screen 43.

ScreenR! 1i43 8g -h t5 = F B0 mmR i g ht

●7-16