Fujitsu fi-4340C manual Part Function, Adf

No .	Part	Function
1	Document cover	Closes over and keeps in place the document to be read.
2	Document bed	Holds document to be read. Also called Flatbed (FB).
3	Document holding pad	Presses document to the Document bed.
4	Automatic document feeder	Automatically feeds documents to the reading position.
	(ADF)
5	Stacker	Stacks the read documents.
6	Operator panel	Contains indicator panel that indicates scanner status.
7	Transport Lever	Transport lever Secures the carrier unit. Set to locked position
		when moving scanner.
8	ADF paper chute	Holds the documents to be fed by the automatic document
		feeder (ADF).
9	ADF lever	Opens/closes the ADF to enable the removal of documents
		jammed in the feeder.
10	Power switch	Turns the power On or Off.
11	Power inlet	Connects to an AC power outlet with the power cable.
12	EXT connector	Connects to an optional imprinter.
13	SCSI terminator switch	Set to ON when the image scanner is the final device on the
		SCSI daisy chain. Otherwise, set to OFF.
14	SCSI-ID switch	Sets the SCSI ID. (Default ID is 5.)
15	Interface connectors	Connect to the host system with interface cables.
16	Third party slot	A Fujitsu VIDEO INTERFACE BOARD or
		fi-CMP3(JPEG COMPRESSION BOARD) is installed.
17	Spare Pad ASSY	Spare pad assembly. (One spare pad assembly is provided as
		the default setting.)

●1-4