4.At Screen 55,select=! 
por 
ttoymoveRtheeplaces eof the blinking (changeable)
digit and press 
or 
to change the value, than press 
. The scanner displays Screen 56 Screen 56
NOTICE
5.At Screen 56,specify! 
or 
to select “On”
if you want to initialize, than press 
. The scanner displays Screen 57 Screen 57
6.At Screen 57,specify whether the number is reset at once.Press 
or 
to select “yes” if you want
to reset at once, than press 
. The scanner terminates the setup mode.The possible maximum number is 99999 (for five digits) or 16777215 (for eight digits).
NOTICE
The command from the host computer overrides the specification of the operator panel.When the host computer issues a command disabling the specification of the operator panel,Screen 57 does not appear.
●