6.How to Use the FUJITSU Scanner Control Center
6.1Outline
This software that is resident in the system continuously monitors the scanner connected and starts the target application in response to an instruction from the operation panel in the scanner. (Pressing the start button on the scanner starts the application that has been set in advance.)
For applicable models, see "Relevant Image Scanner Specification" in the Appendix.
6.2How to Start the FUJITSU Scanner Control Center
Select as follows: [Start] - [Program] - [Scanner Utility for Microsoft Windows], then [FUJITSU Scanner Control Center]
If this application is started, it is stationed in the system, then an icon is displayed on the task tray.
An icon indication changes to show how the scanner is connected as follows:
1.The scanner can be used: 
2.The scanner power is turned off and not connected: 
56