∙Scanner could not find although it searched again. Check the connection of the scanner and retry again
Cause: | The scanner power may not have been turned on or the cable may |
| have been connected incorrectly. Otherwise, the OS may not |
| recognize the scanner. |
User response: | Make sure that the scanner power has been turned on and the cable |
| has been connected correctly, then retry rescanning. Or, check if the |
| OS recognizes the scanner. If the OS does not recognize it, let it |
| recognize the scanner, then retry. |
∙Can not rescan the scanner.Close the application using the driver and retry again
Cause: | An attempt was made to rescan while the driver was in use. |
User response: | It is impossible to rescan while the driver is in use. Close the |
| application that uses the driver and retry. |
∙Can not get the EEPROM data. The setting of the function key can not change. Check the connection of the scanner
∙Can not change the setting of the function key.Check the connection of the scanner and try the operation again
Cause: | While the scanner with function keys are being monitored, the scanner |
| power may be turned off or the cable may be connected incorrectly. |
User response: | Make sure that the scanner power has been turned on and the cable |
| has been connected correctly. |
∙It is not authorized to write into the folder which is installed FUJITSU Scanner Control Center. Can not change the function of the function key. Check the Access Authority of the folder which is installed FUJITSU Scanner Control Center.
Cause: | While the scanner with function keys are being monitored, Access |
| Authority may not have been set to the folder where the FUJITSU |
| scanner Control Center has been installed. |
User response: | To change the setting of the function key, Access Authority of the |
| folder where FUJITSU scanner Control Center has been installed is |
| required. Set Access Authority to the folder where FUJITSU scanner |
| Control Center has been installed, or execute it with Administrator |
| Authority. |
∙Scanner is not selected. Please select a scanner
Cause: | The OK button was pressed without selecting the scanner in the |
| scanner select dialog. |
User response: | Press the OK button after selecting the scanner to be monitored. |
71