Endorser/stamp: | With endorser option |
| (Reverse side, minimum left margin printing position of |
| 20 mm) 2 |
| Maximum number of characters to be printed: 30 characters |
Interface: |
|
Online offset adjustment: | Enabled |
Job control: | Enabled |
Automatic skew compensation: Enabled | |
Drop out: | Enabled |
Double feed detection: | Enabled |
Buffer scan (cache using scanner memory) function: Enabled | |
Blank page skip: | Enabled (only when scanner memory is used) |
Use of FUJITSU Scanner Control Center: Enabled
2 If 0 mm is specified as the endorser print position, printing will begin 20 mm from the edge of the page.
86