8. Appendix
8.1 Relevant Image Scanner Specification
Product: | M3093GX 1 (device name: |
Type: | Desktop |
Image sensor: | Reduced optical system |
Operating method: | Document fixed, scanner unit moving (flat bed), |
| Automatic Document Feeder (ADF) |
Light source: | Xe discharge tube (Green) |
Basic resolution: | Horizontal scanning: 400 dpi |
| Vertical scanning:400, 300, 240, 200 dpi |
Output resolution: | Standard: 400, 300, 240, 200 dpi |
| With image processing option: 50 dpi to 800 dpi (at steps of 1 dpi) |
Grayscale levels (internal): | 8 bit 256 levels |
Grayscale output: | Enabled (8 bits) |
Halftone Patterns: | Dither matrix (can be downloaded), Error diffusion |
Scanning speed: | 1.6 sec or less (A4, 200 dpi) |
ADF scanning speed 2: | 27 pages/minute (200 dpi, A4, 55 kg) |
ADF stacker capacity: | Maximum 50 sheets, ream weight: 55kg, A4 |
Document size 3: | Maximum 216 mm × 356 mm Legal size paper |
Supported regular paper: | A4, A5/A5 Landscape, A6/A6 Landscape, B5, B6/B6 Landscape, |
| Letter, Legal, US Executive |
Isolation specification: | Specified (one location) |
Background compensation: | Enabled |
Contrast setting: | 256 steps |
Gamma pattern: | 3 internal types (can be downloaded) |
Image processing function: | Image processing circuit II required, |
| Outline emphasis, Outline extraction, Automatic separation, |
| Mirror image, Reverse image, Automatic binarization, Smoothing, |
| Filtering, Noise removal |
Interface: |
|
Job control: | Enabled |
Use of FUJITSU Scanner Control Center: Disabled
1.Use of this scanner requires that the image compression option board
2.This speed is only specified for the scanner itself. The actual reading speed may vary depending on the system configuration.
3.Not all sizes of paper can be used in all devices. For details, refer to the users' manual for the device. For other paper sizes, the customer settings can be used.
72