Samsung ML-7300 manual Cable Specifications Not provided, Connecting the Parallel Cable

Connecting the Parallel Cable

To print from computer software, you need to connect your printer to your computer with a parallel interface cable.

Cable Specifications (Not provided)

The parallel cable should be compatible with the Centronics R parallel interface and IEEE standard 1284. If you purchase a parallel cable, ensure that it :

•Is compatible with Centronics interface.

•Supports bi-directional communications(IEEE standard 1284).

•Is shielded.

•Has the appropriate connector :

-25 pin D-Sub connector on the computer side.

-Amphenol 36 connector on the printer side.

Connecting the Parallel Cable

To connect the printer to your computer use a parallel cable and proceed as follows.

1

2

Check that both the printer and the computer to which it is to be connected are powered off and disconnected from the power point.

Plug the appropriate end of the parallel cable into the connector on the rear of the printer.

2.8 SETTING UP YOUR PRINTER