Samsung ML-7300 manual Reset printer and the firmware will be upgraded

14

15

NETWORK MENU

Set the IP address of the WINDOWS pc running SyncThru in step1. For example, if the IP address is 155.213.211.12, follow these steps:

aPress Item until SV-IP B1 appears on the display.

bPress Value until 155 appears on the display.

cPress Enter/Cancel.

dPress Item until SV-IP B2 appears on the display.

ePress Value until 213 appears on the display.

fPress Enter/Cancel.

gPress Item until SV-IP B3 appears on the display.

hPress Value until 211 appears on the display.

iPress Enter/Cancel.

jPress Item until SV-IP B4 appears on the display.

kPress Value until 12 appears on the display.

lPress Enter/Cancel.

Reset printer and the firmware will be upgraded.

Notes: After the ”Completed. Network Card will start about 30secs

later” message is displayed on SyncThru, click OK.

It may take a few seconds to write the new file to Firmware. Normally 30 seconds is sufficient.

USING OPERATOR PANEL 3.27