Safety Precautions
Before using the printer, please read the instructions in this guide carefully and put the guide in a safe place close to the printer, so that it is available when you need it later. Please take the following precautions when using and maintaining your printer.
●Unplug the printer before cleaning it. Do Not use any liquid or aerosol cleaners. Simply use a damp cloth. Refer to the page of this guide for further details.
●Do Not place the printer on an unstable surface or close to a radiator or source of heat.
●Take care not to block or cover the ventilation holes on the side of the printer. Do Not insert any object in these holes.
●Check that the electrical power source to which you wish to connect the printer complies with the electrical specifications of this printer :
(100 ~ 240V) - Power cord may differ from one country to another.
●Connect all your computer equipment, including the printer to a power point with earthing device. Avoid plugging your printer into the same power point as equipment likely to cause voltage variations, such as a photocopying machine or an air conditioner.
●Check regularly that the power cable is in good condition and is not damaged in any way.
●If you use an extension cord, check that total intensity of all equipment connected to it does not exceed the maximum intensity allowed for the extention cord. Check that the total intensity of the equipment connected to the same power point does not exceed 15 amps.
●Unless otherwise indicated in this guide, do not attempt to repair the printer yourself. Should you detect a fault, return your printer to an authorized service center or your dealer.
●Systematically return your printer to an authorised service center or your local dealer if one of the following situations occurs :
-The power cord or plug is damaged.
-A liquid has been spilled on and/or in the printer.
-The printer has fallen or been dropped or the bodywork is damaged in any way.
-The printer is not operating correctly or you have noticed a significant drop in the quality of the printing.
INTRODUCTION 1.1
