Fujitsu C150-E187-01EN manual Messages concerning to Fujitsu Scanner Control Center

7.1.3 Messages concerning to FUJITSU Scanner Control Center

∙Failed to start-up the application. Check the setting of FUJITSU Scanner Control Center.

∙The setting of the path is blank. Check the setting of FUJITSU Scanner Control Center.

∙Can not find the specified file. Check if the specified path and file name is correct.

∙Can not find the specified work folder. Check if the specified path is correct.

Cause:	The setting of the application may be inadequate.
User response:	Check setting items of [General] in [Application Dialog] and make
	sure settings are correct and there is no omission. If you find any
	incorrect setting or omission, correct it.

∙The same Plug-in has been installed already. Specified Plug-in can not install.

Cause:	An attempt was made to install the same plug-in that has been already
	installed.
User response:	Two or more plug-ins assigned to the same name cannot be installed.

∙The specified file is not the effective plug-in.Specified file can not install.

∙Can not find the entry point of the specified plug-in. Specified file can not install.

Cause:	The specified file may not be the effective plug-in.
User response:	Check whether the specified file is the effective plug-in and retry.

∙Exceeded the number of plug-in to be supported. Can not install the new plug-in.

Cause:	The number of plug-ins to be supported was exceeded.
User response:	The maximum number of plug-ins that can be supported is 50. Delete
	unnecessary plug-ins in the folder where FUJITSU Scanner Control
	Center has been installed, then install another plug-in.

∙The plug-in has not been installed.

Cause:	The check box "Use a Plug-In" was checked but no plug-in has been
	installed.
User response:	To use a plug-in, install a plug-in, then check the check box "Use a
	Plug-In."

∙Can not find the application for the Plug-in use.Can not use the specified plug-in

Cause:	The application to be used for the plug-in may not have been installed.
User response:	Verify that the application to be used for the plug-in has been
	installed. If no application is found, install it.

70