Product: | M3093DG (device name: | ||
Type: | Desktop |
|
|
Image sensor: | Reduced optical system | ||
Operating method: | Document fixed, scanner unit moving (flat bed) | ||
| Automatic Document Feeder (ADF) | ||
| simultaneous | ||
Light source: | Xe discharge tube (Green) | ||
Basic resolution: | Horizontal scanning: | 400 dpi | |
| 400, 300, 240, 200 dpi | ||
Output resolution: | Standard: 6001, 400, 300, 240, 200, 150, 100 dpi | ||
| With image processing option: 50 dpi to 800 dpi (at steps of 1 dpi) | ||
Grayscale levels (internal): | 8 bit 256 levels |
|
|
Grayscale output: | Enabled (8 bits) |
|
|
Halftone Patterns: | Dither matrix (can be downloaded), Error diffusion | ||
Scanning speed 2: | 1.6 sec or less (A4, 200 dpi) | ||
ADF scanning speed: | 27 pages per minute (200 dpi, A4, 55 kg) | ||
22.5 pages per minute (200 dpi, A4, 55 kg) | |||
| (= 45 screens per minute) | ||
ADF stacker capacity: | Maximum 50 sheets, (ream weight: 55kg, A4 [High quality paper, | ||
| normal temperature and humidit]) | ||
Document size: | Maximum 216 mm × 356 mm | ||
Supported regular paper 4: | A4, A5/A5 landscape, A6/A6 landscape, B5, B6/B6 landscape, | ||
| Letter, Legal, US Executive | ||
Cutout specification: | Specified (one location) | ||
Background compensation: | Enabled |
|
|
Contrast setting: | 256 steps |
|
|
Gamma pattern: | 3 internal types (can be downloaded) | ||
Image processing function: Automatic binary (simple system) With image processing option
Outline emphasis, Outline extraction, Automatic separation, Mirror image, Reverse image, Automatic binarization, Smoothing, Filtering, Noise removal
Interface:SCSI-II
Job control: | Enabled |
Use of FUJITSU Scanner Control Center: Disabled
1.An
2.This speed is only specified in the scanner itself. The actual reading speed may vary depending on the system
configuration.
4.Not all sizes of paper can be used in all devices. For details, refer to the users' manual for the device. For other paper sizes, the customer settings can be used.
73