∙The value for custom paper is higher than the maximum scan size. Width needs to equal 279 mm or less and length needs to equal 420 mm or less.
∙The value for custom paper is higher than the maximum scan size. Width needs to equal 11 inch or less and length needs to equal 16.53 inch or less.
∙The value for custom paper is higher than the maximum scan size. Width needs to equal xxx pixel or less and length needs to equal xxx pixel or less.
Cause: | A value exceeding the limit applicable to the scan area of the scanner |
| was specified. |
User response: | To specify a custom paper size, specify the value that is smaller than |
| the value applicable to the device. |
∙The resolution must be less or equal to xxx dpi when scanning in Gray Scale.
Cause: | A value exceeding the limit of resolution for |
| specified. |
User response: | Specify a resolution value that is below the indicated xxx dpi. |
∙Cannot specify Gray Scale with Custom resolution.
Cause: | Custom resolution was designated when |
| designated. |
User response: | Designate a resolution value other than Custom. |
∙Cannot specify Individual Setting with Gray Scale.
Cause: | Gray scale was specified in the settings for the front side or back side |
| was set as the object to be set. |
User response: | Specify Gray Scale only when making the settings for both sides. |
∙Dither pattern file not found.
Cause: | File download has been specified, but a file has not been selected. |
User response: | Use the [File…] button to specify a file. |
∙Gamma pattern file not found.
Cause: | File download has been specified, but a file has not been selected. |
User response: | Use the [File…] button to specify a file. |
∙Selected file could not delete.
Cause: | If the selected setting file is |
User response: | Use Explorer to delete the file later. |
63