Chapter
Note The thresholds for the following fields are set based upon the number of error message which can occur in one second. The value can be from 1 to 65,535.
portSymbolErrThresh
The threshold for the number of times a 8B10B encoding violation, or a disparity violation was detected on the port.
portLinkErrRecvThresh
The threshold for the number of times the link error recovery process happened successfully on the port.
portLinkDownedThresh
The threshold for the number of times the link error recovery process failed on the port.
portRecvErrThresh
The threshold for the number of errors received on the port.
portRecvRemPhysErrThresh
The threshold for the number of remote physical errors received on the port.
portRecvSwRelayErrThresh
The threshold for the number of switch relay errors received on the port.
portXmitDiscardThresh
The threshold for the number of transmit discards received on the port.
portPKeyViolInThresh
The threshold for the number of times PKey inbound was invalid on the port.
portPKeyViolOutThresh
The threshold for the number of times PKey outbound was invalid on the port.
portRawViolInThresh
The threshold for the number of times a raw inbound packet was discarded by the port.
portRawViolOutThresh
The threshold for the number of times a raw outbound packet was discarded by the port.
portLocalLinkIntegThresh
The threshold for the number of local link integrity errors on the port.
portExcBufferOverrunThresh
The threshold for the number of excessive buffer overrun errors on the port.
Time Service
The System Time Information screen allows the user to set the system time using either network time protocol (NTP) or manual overrides.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
| 73 |
| |
|
|