Chapter
Step 1 Install the caged nuts into the 2 back holes (chassis leaf module side) and the top and bottom holes (chassis fan side) in the front of the rack.
Note The 2 front holes should match up with the top and bottom holes of the rail front flange.
All holes should correspond to the rail mounting positions (i.e., the holes marked with pen or tape).
Step 2 Fasten the rail back flange (chassis leaf module side) to the rack by installing two screws into the rail and rack.
Figure 4 | Rail Back Flange |
Install 2 screws to 
top and bottom holes
Step 3 Fasten the rail front flange (chassis fan side) to the rack by installing one screw into the top hole of each rail.
Figure 5 | Rail Front Flange |
Install 2 screws to
top and bottom holes
Install the second rail on the other side of the rack by repeating steps 1 through 3.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
| 23 |
| |
|
|