Cisco Systems PA-4C-E 1 manual Using Flash Memory, Router# copy tftpxcpa28-6 slot0xcpa28-6

Page 36

Configuring the HP ESCON PA

Step 5 To verify that the correct microcode is loaded according to the new instructions, enter the

show controllers EXEC command. The display indicates the currently loaded and running microcode version for each HP ESCON PA.

Step 6 To verify the contents of the configuration file, enter the show running-configEXEC command. You can also verify that the correct software image is configured to load at system restart or reload by using the show startup-configEXEC command.

Using Flash Memory

The following provides information on the different functions of Flash memory that you might need when configuring microcode:

•Copying a New Image to the Flash Memory Card on a Cisco 7200 Series Router, page 36

•Using Additional Flash Memory Commands, page 37

•Recovering from Locked Blocks, page 38

Copying a New Image to the Flash Memory Card on a Cisco 7200 Series Router

Copying a new image to a Flash memory card might be required when a new microcode image becomes available. Use the command copy tftp:filename [ bootflash slot0 slot1 ]:filename for the copy procedure, where tftp:filename is the source of the file and [ bootflash slot0 slot1 ]:filename is the destination in onboard Flash memory or on either of the Flash memory cards.

The following example shows the output from the copy tftp:filename command for Cisco IOS Release 12.0:

Router# copy tftp:xcpa28-6 slot0:xcpa28-6

Address or name of remote host [181.23.250.2]?

Accessing tftp://181.23.250.2/jdoe/xcpa218-6...

Loading jdoe/xcpa218-6 from 181.23.250.2(via Ethernet3/0):!

Expanding slot0:/xcpa218-6_kernel_ecpa4 (472086 bytes):!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Expanding slot0:/xcpa218-6_kernel_xcpa (414940 bytes):!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Expanding slot0:/xcpa218-6_seg_802 (246184 bytes):!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!

Expanding slot0:/xcpa218-6_seg_cmpc (562804 bytes):!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Expanding slot0:/xcpa218-6_seg_csna (96488 bytes):!!!!!!!!!!!!!!!!!!!!

Expanding slot0:/xcpa218-6_seg_eca (460712 bytes):!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Expanding slot0:/xcpa218-6_seg_offload (91976 bytes):!!!!!!!!!!!!!!!!!! Expanding slot0:/xcpa218-6_seg_pca (68844 bytes):!!!!!!!!!!!!! Expanding slot0:/xcpa218-6_seg_push (15492 bytes):!!!

Expanding slot0:/xcpa218-6_seg_sslc (827760 bytes):!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Expanding slot0:/xcpa218-6_seg_tcpip (161196 bytes):!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Expanding slot0:/xcpa218-6_seg_tn3270 (680672 bytes):!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!

[OK - 4109312/8218624 bytes]

PA-4C-E 1-Port High-Performance ESCON Channel Port Adapter Installation and Configuration

36

OL-3743-02

 

 

Page 35 Page 37
Image 36
Page 35 Page 37
Contents PA-4C-E 1-Port High-Performance Document Revision History ObjectivesOrganization Document Version Date Change SummaryRelated Documentation OL-3743-02 Overview Port Adapter OverviewCisco 7206 with an HP Escon PA in Port Adapter Slot Escon Specifications Characteristic Escon SpecificationLEDs Sequence Present Loaded Signal Online OffEscon Cable Port Adapter Slot Locations on the Supported PlatformsIdentifying Interface Addresses Port Adapter Slots in the Cisco 7206 RouterPlatform Interface Address Format Numbers Syntax Required Tools and Equipment HP Escon PA Microcode OverviewHardware and Software Requirements Router# show microcodeChecking Hardware and Software Compatibility Cisco IOS Release Image NamesSafety Guidelines Safety WarningsWarnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla SicurezzaAviso Instruções Importantes DE Segurança Spara Dessa Anvisningar Laser LED Safety Information Electrical Equipment GuidelinesPreventing Electrostatic Discharge Damage Laser Radiation Staring into Laser Beam Removing and Installing Port Adapters Handling Port AdaptersOnline Insertion and Removal Port Adapter Removal and Installation Step Attaching the HP Escon PA to the Channel Configuring the HP Escon PA Using the Exec Command InterpreterConfiguring the HP Escon PA Interface Performing a Basic Interface ConfigurationRouter# configure terminal Checking the Configuration Using show Commands to Verify the New Interface StatusRouterconfig# interface channel 2/0 Routerconfig-if#ip address 1.1.1.10Using the show version or show hardware Commands Router# show versionUsing the show controllers Commands Router# show controllers channel 2/0Using the show diag Command Router# show interface channel 4/0Using the Ping Command to Verify Network Connectivity Router# pingUpgrading Your HP Escon PA Microcode How Does HP Escon PA Microcode Ship?Upgrading the HP Escon PA Microcode from Cisco.com Configuring the HP Escon PA Microcode Router show flashRouterconfig# microcode ecpa slot0xcpa28-1 Routerconfig# no microcode ecpa slot0xcpa28-1Using Flash Memory Router# copy tftpxcpa28-6 slot0xcpa28-6Using Additional Flash Memory Commands Router# cd slot0Router# squeeze slot0 Using SanDisk Devices Recovering from Locked BlocksTftpxcpa27-1 disk0xcpa27-1 Running HP Escon PA Diagnostic Tests Router# configuration termConfiguring the HP Escon PA
Top Page Image Contents