Preparing for Installation
Table 4 lists the specific Cisco IOS software images that are compatible with the HP ESCON PA.
Table 4 | Cisco IOS Release Image Names | |
|
| |
Cisco IOS Release | Image Names | |
|
| |
Release 12.1(5)T | ||
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
Table 5 specifies the recommended minimum level of HP ESCON PA microcode for the corresponding Cisco IOS release.
Table 5 | Cisco IOS Releases and HP ESCON PA Microcode Image | |
|
| |
Cisco IOS Release | HP ESCON PA Image | |
|
| |
Release 12.1(5)T |
| |
|
|
|
For the latest Cisco IOS release that supports the HP ESCON PA on the Cisco 7200 series routers, refer to “Checking Hardware and Software Compatibility” section on page 14 .
Checking Hardware and Software Compatibility
To check the minimum software requirements of Cisco IOS software with the hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com. This tool does not verify whether modules within a system are compatible, but it does provide the minimum IOS requirements for individual hardware modules or components.
Note Access to this tool is limited to users with Cisco.com login accounts.
To access Software Advisor, click Log In at Cisco.com and go to Support > Tools and Resources. You can also access the tool by pointing your browser directly to http://www.cisco.com/en/US/support/tsd_most_requested_tools.html.
Choose a product family or enter a specific product number to search for the minimum supported software release needed for your hardware.
14 |
|
|
|