Regulatory Compliance and Safety Information for the Cisco AS5400 and Cisco AS5400XM Universal Gateways
Read this document before installing or servicing the following systems:
•Cisco AS5400 universal gateway
•Cisco AS5400XM universal gateway
Note Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install, replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code if you are in the United States.
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
This document contains the following sections:
•56K Statement, page 2
•Agency Approvals, page 2
•Maintaining Safe Installation Distances, page 3
•Translated Safety Warnings, page 4
•United States, page 53
•Canada, page 56
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA
Copyright © 2004 Cisco Systems, Inc. All rights reserved.