Cisco Systems Cisco AS5400XM Scandinavia, Japan, Singapore, Directives Compliance

Scandinavia

E1 Dial Feature Card Independent of Host

The Cisco Systems E1 dial feature card (DFC) is a chassis-mounted processor/interface card for use within a range of data communication (gateway and router) chassis supplied by Cisco Systems. The Cisco Systems E1 DFC is a self-contained product that provides all of the hardware and software necessary to allow connection of the Cisco AS5400, Cisco AS5400HPX, and Cisco AS5400XM to structured digital leased line circuits (point to point) using CTR12 operating at 2 Mbps. The card can also be used on an open structured leased line; however, the framing cannot be disabled. The Cisco Systems E1 DFC is also ICTR4-compliant for use on Primary Rate ISDN circuits operating at 2 Mbps. The Cisco Systems E1 DFC is fully transportable between compatible host chassis. The choice of each compatible chassis has no effect on capabilities, functionality, or performance of the Cisco Systems E1 DFC.

Directives Compliance

This equipment complies with the following European Directives: 89/336/EEC (electromagnetic compatibility), 73/23/EEC (low voltage), and 92/59/EEC (general product safety). The CE marking (see Figure 3) signifies that this product meets the telecommunications directive 91/263/EEC.

Figure 3 CE Marking

Scandinavia

The channelized T1/E1 trunk card meets Sweden requirements for E1 support as specified in 98031130 standards.

Japan

The channelized T3 trunk card meets Japan requirements for T3 support as specified in JATE

T98-6304-0 standards.

The channelized E1 trunk card meets Japan requirements for E1 support as specified in JATE

N98-N019-0 standards.

Singapore

The channelized E1 trunk card meets Singapore requirements for E1 support as specified in

ISDN2-IPTA-AE 0345-98 and DLCN1-MBPS-AO-0344-98 standards.

Regulatory Compliance and Safety Information for the Cisco AS5400 and Cisco AS5400XM Universal Gateways

OL-10264-01 57