Cisco Systems Media Gateway Controller Node Manager Terminal Software, Solaris Operating System

Page 14

Chapter 2 Installing Cisco MNM

Performing a New Installation of Cisco MNM

See the latest Cisco EMF 3.2 software patch and release note (an Acrobat PDF file, such as

CEMF3.2P7DepRelNote.pdf) at the following URL.

http://www.cisco.com/en/US/docs/net_mgmt/element_manager_system/3.2/release/notes/rn_3_2.h tml

For all releases of 3.2 release notes, go to the following URL.

http://www.cisco.com/en/US/docs/net_mgmt/element_manager_system/3.2_service_pack_7/releas e/notes/rn3_2sp7.html

•CEMF Crypto Add-on Package Software

If you want to use SSH for secure communications with SSH-enabled network components, download the CEMF Crypto Add-On package available at

http://www.cisco.com/cgi-bin/tablebuild.pl/cemf-addon-3des

Download both the CEMF Crypto Add-on Package Software and the CEMF Crypto Add-on Package Installation Guide. You must have authorization to download cryptographic software. If you do not have it, you are automatically redirected to an authorization request page.

•CiscoView 6.1.8 (from LMS DVD—Solaris 10 only). Install CiscoView 6.1.8 if you want to manage Cisco ITP-Ls or Cisco LAN switches (Cisco MNM uses the CiscoView server as the management interface). Install CiscoView before you install Cisco EMF and Cisco MNM. The full LMS 3.1 package is not licensed when included with Cisco MNM. However, you can purchase the complete LMS 3.1 product and install it with the MGC Node Manager on the same Sun Server. Make sure there is enough disk and partition space, since the full LMS package is large.

Note If Cisco MNM coexists with CiscoView 6.1.8 on a Solaris 10 Operating System, the version of the Solaris Operating System must be the November 2006 release or higher, and the minimum recommended cluster patch levels are those released April 17, 2007.

•Cisco VSPT. The Cisco VSPT version must support your version of the Cisco PGW 2200 Softswitch software. If you are managing nodes with

Cisco PGW 2200 Softswitch hosts running different software versions, you can install multiple VSPT versions. Cisco MNM automatically launches the correct version for the selected host.

For the latest VSPT patch, go to http://www.cisco.com/cgi-bin/tablebuild.pl/vspt. For Cisco MNM release notes, go to http://www.cisco.com/en/US/products/sw/netmgtsw/ps1912/prod_release_notes_list.html.

Note CD is the installation media for Cisco MNM, and DVD is the installation media for LMS 3.1 and CiscoView 6.1.8.

X Terminal Software

You must have Reflection 7.2 or higher installed to access Cisco MNM from a remote workstation. See the “Task 11: Set Up the X Terminal Workstations for Remote Access” section on page 2-20for more information.

Solaris Operating System

The machines that run Cisco MNM must have the Sun Solaris 10 operating system with Common Desktop Environment (CDE) 1.3 installed.

Cisco Media Gateway Controller Node Manager Installation Guide

2-2

OL-18332-01

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Americas Headquarters Text Part Number OL-18332-01Page N T E N T S Upgrading from Previous Cisco MNM Releases Related Documentation Document ObjectivesAudience OL-18332-01 December Initial release Document Change HistoryRelease Number Document Number Change Date Change Summary A P T E R Installation OverviewWho Should Install Cisco MNM? Client Software Determine Your Hardware RequirementsServer Software Supported Configurations Distributed ConfigurationDisk Drives and Database Storage Number, Network Size Cisco PGW 2200 SoftswitchHardware Requirements Operators, 11-20 PairsBefore You Begin Installation ChecklistInstall them now Information in the release notesOL-14272-02 Cisco MNM and Cisco Vspt Software Performing a New Installation of Cisco MNMInstallation Software Terminal Software Solaris Operating SystemRequired Information Information Where To Find It ValueIfconfig -a Task 2 Ensure That Network Devices Have the Correct Software Task 3 Plan and Execute Hard Drive PartitioningMedium to Large-Sized Deployments2 Task 5 Make System Configuration ModificationsCisco PGW 2200 Softswitch OS recommended patches ManufacturerTask 6 Obtain a Cisco EMF License Setting Up IP and Remote User Access FilesDNS Configurations File ModificationOn the Cisco MNM workstation or on a remote server Use these steps to install CiscoView6509 devices through a CiscoView server Press Enter to read the license agreement Run the installation setup script by enteringInstallation Client patchesMenu listing the Cisco EMF installation options displays Task 8 Install Cisco EMFInstalling on the Management Server Enter Installing on the Presentation ServerBefore a Presentation client is installed Installing Cisco EMF Service Packs Choose the package to installTo download a Cisco EMF patch, use the following steps Installing the Cisco EMF SSH Add-On PackageDownloading Cisco EMF Patches Starting Cisco EMF Installing Cisco MNM Etc/init.d/volmgt startVerifying the Cisco MNM Installation Cmnminstall -uVerifying the Installation of CiscoView About Help Enter your login name and passwordStarting Cisco MNM Changing the IP Address of the CiscoView Server If NeededGetting Started with Secure Communications on Cisco MNM Updating Existing SSH-Enabled Network ElementsDeploying New SSH-Enabled Elements Install the package using the following command Task 10 Install the CiscoView Security ModuleIdentifying SSH-Enabled Elements Change the user to rootFor Broadcast method Creating an Xdmcp ConnectionCreating a Workstation Connection For Direct methodUpgrading from Previous Cisco MNM Releases Task 13 Configure Network Devices to Forward AlarmsFixing Insufficient Color Problems Task 12. Synchronize Time# ./cmnminstall -u # ./cmnminstall -upgrade Choose Deployment Delete Objects Uninstalling Cisco MNMBacking Up Your Databases Click Finish in the prompt# ./cmnminstall -s Displaying Current Cisco MNM Release PackagesRemove the Cisco EMF using the following command Viewing Help for Cisco MNM Install ScriptsUninstalling Cisco EMF All current Cisco MNM release packages displayRelated Topics Troubleshooting Common Installation ProblemsCisco EMF is uninstalled Unmouting a DVD-ROM Drive From a Remote System Problem Suggested StepsMounting a DVD-ROM Drive from a Remote System License is a multi-user license If needed, update the IP address in Cisco EMFWhen prompted, enter the new host name Restart Cisco EMF Another but must get a new license for your current machineClear the cache files by deleting the files in /tmp/ostore Setting by a factor of fourStop Cisco EMF Restart Cisco EMFOscommsegreservedsize D E IN-2 Time Greenwich Mean Time IN-4
Top Page Image Contents