Cisco Systems Media Gateway Controller Node Manager manual Starting Cisco EMF

Page 25

Chapter 2 Installing Cisco MNM

Performing a New Installation of Cisco MNM

Note Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid contract but do not have a user ID or password, you can register at this URL: http://tools.cisco.com/RPF/register/register.do.

Step 1 Go to http://www.cisco.com/kobayashi/sw-center/sw-netmgmt.shtml.

Note There are no CEMF patches planned currently.

Step 2 Log in to Cisco.com. The Network Management Software page appears.

Step 3 Click Cisco Element Management Framework. The Software Download page appears. Step 4 Select the version of the CEMF Patch that you want to download to your system.

Step 5 Log in and follow the on-screen prompts.

Starting Cisco EMF

To initiate background processes in Cisco EMF, use these steps:

Step 1 Log in to the system where you installed Cisco EMF

Step 2 Become the root user using the following command:

#su - root

Step 3 Change the working directory to <CEMF_ROOT>/bin using the following command:

#cd <CEMF_ROOT>/bin

Where <CEMF_ROOT> is the directory where Cisco EMF is installed.

Step 4 Use the following command to start Cisco EMF if the Cisco EMF background processes are not already running

#./cemf start

Note Depending on your server, it might take 10-30 minutes for the Cisco EMF startup processes to complete. A relatively longer startup might occur if your database is new or has been reset.

Task 9: Install Cisco MNM Release 2.8(1) and Verify the Installation

Follow the instructions in this section to install Cisco MNM. If you are upgrading from Version 1.5 or 2.x, see the “Upgrading from Previous Cisco MNM Releases” section on page 2-21.

Check for the latest software patches by going to the URL provided in the “Installation Software” section on page 2-1.

 

 

Cisco Media Gateway Controller Node Manager Installation Guide

 

 

 

 

 

 

OL-18332-01

 

 

2-13

 

 

 

 

 

Image 25
Contents Text Part Number OL-18332-01 Americas HeadquartersPage N T E N T S Upgrading from Previous Cisco MNM Releases Audience Document ObjectivesRelated Documentation Release Number Document Number Change Date Change Summary Document Change HistoryOL-18332-01 December Initial release Who Should Install Cisco MNM? Installation OverviewA P T E R Server Software Determine Your Hardware RequirementsClient Software Distributed Configuration Supported ConfigurationsHardware Requirements Number, Network Size Cisco PGW 2200 SoftswitchDisk Drives and Database Storage Operators, 11-20 PairsInstall them now Installation ChecklistBefore You Begin Information in the release notesOL-14272-02 Installation Software Performing a New Installation of Cisco MNMCisco MNM and Cisco Vspt Software Solaris Operating System Terminal SoftwareIfconfig -a Information Where To Find It ValueRequired Information Task 3 Plan and Execute Hard Drive Partitioning Task 2 Ensure That Network Devices Have the Correct SoftwareCisco PGW 2200 Softswitch OS recommended patches Task 5 Make System Configuration ModificationsMedium to Large-Sized Deployments2 ManufacturerDNS Configurations Setting Up IP and Remote User Access FilesTask 6 Obtain a Cisco EMF License File Modification6509 devices through a CiscoView server Use these steps to install CiscoViewOn the Cisco MNM workstation or on a remote server Installation Run the installation setup script by enteringPress Enter to read the license agreement Client patchesInstalling on the Management Server Task 8 Install Cisco EMFMenu listing the Cisco EMF installation options displays Before a Presentation client is installed Installing on the Presentation ServerEnter Choose the package to install Installing Cisco EMF Service PacksDownloading Cisco EMF Patches Installing the Cisco EMF SSH Add-On PackageTo download a Cisco EMF patch, use the following steps Starting Cisco EMF Etc/init.d/volmgt start Installing Cisco MNMCmnminstall -u Verifying the Cisco MNM InstallationVerifying the Installation of CiscoView Starting Cisco MNM Enter your login name and passwordAbout Help Changing the IP Address of the CiscoView Server If NeededDeploying New SSH-Enabled Elements Updating Existing SSH-Enabled Network ElementsGetting Started with Secure Communications on Cisco MNM Identifying SSH-Enabled Elements Task 10 Install the CiscoView Security ModuleInstall the package using the following command Change the user to rootCreating a Workstation Connection Creating an Xdmcp ConnectionFor Broadcast method For Direct methodFixing Insufficient Color Problems Task 13 Configure Network Devices to Forward AlarmsUpgrading from Previous Cisco MNM Releases Task 12. Synchronize Time# ./cmnminstall -u # ./cmnminstall -upgrade Backing Up Your Databases Uninstalling Cisco MNMChoose Deployment Delete Objects Click Finish in the promptDisplaying Current Cisco MNM Release Packages # ./cmnminstall -sUninstalling Cisco EMF Viewing Help for Cisco MNM Install ScriptsRemove the Cisco EMF using the following command All current Cisco MNM release packages displayCisco EMF is uninstalled Troubleshooting Common Installation ProblemsRelated Topics Mounting a DVD-ROM Drive from a Remote System Problem Suggested StepsUnmouting a DVD-ROM Drive From a Remote System When prompted, enter the new host name Restart Cisco EMF If needed, update the IP address in Cisco EMFLicense is a multi-user license Another but must get a new license for your current machineStop Cisco EMF Setting by a factor of fourClear the cache files by deleting the files in /tmp/ostore Restart Cisco EMFOscommsegreservedsize D E IN-2 Time Greenwich Mean Time IN-4