Cisco Systems Media Gateway Controller Node Manager Run the installation setup script by entering

Page 20

Chapter 2 Installing Cisco MNM

Performing a New Installation of Cisco MNM

•If your machine does not have a DVD-ROM drive, see Table 2-5in the Troubleshooting section for steps on mounting a DVD-ROM drive from a remote machine.

Step 2

Write down the CiscoView server IP address, which is needed for Task 9 when you install Cisco MNM.

Step 3

Run the installation setup script by entering:

 

 

 

# sh setup.sh

 

 

 

or

 

 

 

# ./setup.sh

Step 4

Press Enter to read the license agreement.

Step 5

Enter Y to accept the license agreement and proceed with the installation, or enter N to exit the

 

 

 

installation.

 

 

 

 

Note

• Error messages or warning messages appear if you do not have the required or recommended Server

 

 

 

and Client patches.

•CiscoView must use the default port number 1741. Do not modify this number during installation.

Step 6 Select one of the following installation modes:

a.Typical to select the components and install the selected components in the default location (/opt/CSCOpx). This is the default installation mode.

b.Custom to select optional components, customize the settings, and to specify the location.

Step 7 Select CiscoView 6.1.8 to begin the installation. When the installation is complete, the following messages display:

Software Installation Tool Completed

Possible Warnings/Errors Encountered

The warning and error messages that appear after these messages do not hinder the installation. They only indicate that you need to take corrective actions after the installation is complete.

Your Solaris machine has successfully installed CiscoView.

For more CiscoView installation details, see the Installation and Setup Guide for CiscoView 5.4 (Standalone) at

http://www.cisco.com/en/US/products/sw/cscowork/ps4565/products_installation_guide_book09186a0 0800e19f6.html

To get the supported device list, see the User Guide for CiscoView 6.1.8 at

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_ciscoview/6.1.8/user/guide/cv618_ug.html

After installing CiscoView 6.1.8, get the support list for Signaling Link Terminals ITP-Ls and Media Gateways (MGWs) by logging in to the CiscoView server. If your Cisco ITP-L or MGW isn't included in the list, download the device package at

http://www.cisco.com/cgi-bin/Software/CiscoView/cvplanner.cgi

Add the device package by following the instructions provided in the readme file.

Cisco Media Gateway Controller Node Manager Installation Guide

2-8

OL-18332-01

 

 

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Americas Headquarters Text Part Number OL-18332-01Page N T E N T S Upgrading from Previous Cisco MNM Releases Related Documentation Document ObjectivesAudience OL-18332-01 December Initial release Document Change HistoryRelease Number Document Number Change Date Change Summary A P T E R Installation OverviewWho Should Install Cisco MNM? Client Software Determine Your Hardware RequirementsServer Software Supported Configurations Distributed ConfigurationNumber, Network Size Cisco PGW 2200 Softswitch Hardware RequirementsDisk Drives and Database Storage Operators, 11-20 PairsInstallation Checklist Install them nowBefore You Begin Information in the release notesOL-14272-02 Cisco MNM and Cisco Vspt Software Performing a New Installation of Cisco MNMInstallation Software Terminal Software Solaris Operating SystemRequired Information Information Where To Find It ValueIfconfig -a Task 2 Ensure That Network Devices Have the Correct Software Task 3 Plan and Execute Hard Drive PartitioningTask 5 Make System Configuration Modifications Cisco PGW 2200 Softswitch OS recommended patchesMedium to Large-Sized Deployments2 ManufacturerSetting Up IP and Remote User Access Files DNS ConfigurationsTask 6 Obtain a Cisco EMF License File ModificationOn the Cisco MNM workstation or on a remote server Use these steps to install CiscoView6509 devices through a CiscoView server Run the installation setup script by entering InstallationPress Enter to read the license agreement Client patchesMenu listing the Cisco EMF installation options displays Task 8 Install Cisco EMFInstalling on the Management Server Enter Installing on the Presentation ServerBefore a Presentation client is installed Installing Cisco EMF Service Packs Choose the package to installTo download a Cisco EMF patch, use the following steps Installing the Cisco EMF SSH Add-On PackageDownloading Cisco EMF Patches Starting Cisco EMF Installing Cisco MNM Etc/init.d/volmgt startVerifying the Cisco MNM Installation Cmnminstall -uVerifying the Installation of CiscoView Enter your login name and password Starting Cisco MNMAbout Help Changing the IP Address of the CiscoView Server If NeededGetting Started with Secure Communications on Cisco MNM Updating Existing SSH-Enabled Network ElementsDeploying New SSH-Enabled Elements Task 10 Install the CiscoView Security Module Identifying SSH-Enabled ElementsInstall the package using the following command Change the user to rootCreating an Xdmcp Connection Creating a Workstation ConnectionFor Broadcast method For Direct methodTask 13 Configure Network Devices to Forward Alarms Fixing Insufficient Color ProblemsUpgrading from Previous Cisco MNM Releases Task 12. Synchronize Time# ./cmnminstall -u # ./cmnminstall -upgrade Uninstalling Cisco MNM Backing Up Your DatabasesChoose Deployment Delete Objects Click Finish in the prompt# ./cmnminstall -s Displaying Current Cisco MNM Release PackagesViewing Help for Cisco MNM Install Scripts Uninstalling Cisco EMFRemove the Cisco EMF using the following command All current Cisco MNM release packages displayRelated Topics Troubleshooting Common Installation ProblemsCisco EMF is uninstalled Unmouting a DVD-ROM Drive From a Remote System Problem Suggested StepsMounting a DVD-ROM Drive from a Remote System If needed, update the IP address in Cisco EMF When prompted, enter the new host name Restart Cisco EMFLicense is a multi-user license Another but must get a new license for your current machineSetting by a factor of four Stop Cisco EMFClear the cache files by deleting the files in /tmp/ostore Restart Cisco EMFOscommsegreservedsize D E IN-2 Time Greenwich Mean Time IN-4
Top Page Image Contents