Cisco Systems Media Gateway Controller Node Manager manual Verifying the Cisco MNM Installation

Page 27

Chapter 2 Installing Cisco MNM

Performing a New Installation of Cisco MNM

Note To upgrade to the next release of Cisco MNM, use the command:

./cmnminstall -u

Step 9 Enter y and press Enter to continue.

Step 10 Enter the required information as follows:

•Database backed up—PressEnter if you had your databased backed up.

•CiscoView Server IP address—Enter the IP address of the CiscoView server installed in “Task 7: Install CiscoView 6.1.8 on a Solaris 10 Operating System” section on page 2-7. If you are not using CiscoView, press Enter.

•Logfile directory location—Press Enter to accept the default location /var/tmp, or enter another location and press Enter.

•Logfile name—Press Enter to accept the default name CSCOcmnm.log, or enter another name and press Enter.

Step 11 Enter y to proceed with the installation if the disk space is sufficient.

When the installation is complete, text similar to the following is displayed:

Everything appears to be installed correctly.

Note The installation might take 15–40 minutes, depending on your system. If the installation is not successful, check the installation log, /var/tmp/installCSCOcmnm.log.

This completes the Cisco MNM installation procedure. Continue with “Verifying the Cisco MNM Installation” section on page 2-15.

Verifying the Cisco MNM Installation

Step 1 Before starting Cisco MNM, verify that the package is installed by using the following command:

#pkginfo CSCOcmnm

Text similar to the following is displayed:

application CSCOcmnm

Cisco MGC-Node Manager(CMNM)2.8.1

Step 2 Verify that the Cisco MNM element managers have been installed using the following command:

#<CEMF_ROOT>/bin/cmnmversion -verbose

Text similar to the following is displayed:

	CSCOcmnm Tool Versions
			Patch Build		Build
	Name	Version Level		Num	Type
------------------------------------
	CSCOcmnm	2.8.1(FCS)		00 102308 REL
	CSCOcmcv	2.8.1
	CSCOcmhp	2.8.1	00
				Cisco Media Gateway Controller Node Manager Installation Guide


	OL-18332-01						2-15
	OL-18332-01						2-15

Image 27

Contents Text Part Number OL-18332-01 Americas HeadquartersPage N T E N T S Upgrading from Previous Cisco MNM Releases Document Objectives AudienceRelated Documentation Document Change History Release Number Document Number Change Date Change SummaryOL-18332-01 December Initial release Installation Overview Who Should Install Cisco MNM?A P T E R Determine Your Hardware Requirements Server SoftwareClient Software Distributed Configuration Supported ConfigurationsOperators, 11-20 Pairs Number, Network Size Cisco PGW 2200 SoftswitchHardware Requirements Disk Drives and Database StorageInformation in the release notes Installation ChecklistInstall them now Before You BeginOL-14272-02 Performing a New Installation of Cisco MNM Installation SoftwareCisco MNM and Cisco Vspt Software Solaris Operating System Terminal SoftwareInformation Where To Find It Value Ifconfig -aRequired Information Task 3 Plan and Execute Hard Drive Partitioning Task 2 Ensure That Network Devices Have the Correct SoftwareManufacturer Task 5 Make System Configuration ModificationsCisco PGW 2200 Softswitch OS recommended patches Medium to Large-Sized Deployments2File Modification Setting Up IP and Remote User Access FilesDNS Configurations Task 6 Obtain a Cisco EMF LicenseUse these steps to install CiscoView 6509 devices through a CiscoView serverOn the Cisco MNM workstation or on a remote server Client patches Run the installation setup script by enteringInstallation Press Enter to read the license agreementTask 8 Install Cisco EMF Installing on the Management ServerMenu listing the Cisco EMF installation options displays Installing on the Presentation Server Before a Presentation client is installedEnter Choose the package to install Installing Cisco EMF Service PacksInstalling the Cisco EMF SSH Add-On Package Downloading Cisco EMF PatchesTo download a Cisco EMF patch, use the following steps Starting Cisco EMF Etc/init.d/volmgt start Installing Cisco MNMCmnminstall -u Verifying the Cisco MNM InstallationVerifying the Installation of CiscoView Changing the IP Address of the CiscoView Server If Needed Enter your login name and passwordStarting Cisco MNM About HelpUpdating Existing SSH-Enabled Network Elements Deploying New SSH-Enabled ElementsGetting Started with Secure Communications on Cisco MNM Change the user to root Task 10 Install the CiscoView Security ModuleIdentifying SSH-Enabled Elements Install the package using the following commandFor Direct method Creating an Xdmcp ConnectionCreating a Workstation Connection For Broadcast methodTask 12. Synchronize Time Task 13 Configure Network Devices to Forward AlarmsFixing Insufficient Color Problems Upgrading from Previous Cisco MNM Releases# ./cmnminstall -u # ./cmnminstall -upgrade Click Finish in the prompt Uninstalling Cisco MNMBacking Up Your Databases Choose Deployment Delete ObjectsDisplaying Current Cisco MNM Release Packages # ./cmnminstall -sAll current Cisco MNM release packages display Viewing Help for Cisco MNM Install ScriptsUninstalling Cisco EMF Remove the Cisco EMF using the following commandTroubleshooting Common Installation Problems Cisco EMF is uninstalledRelated Topics Problem Suggested Steps Mounting a DVD-ROM Drive from a Remote SystemUnmouting a DVD-ROM Drive From a Remote System Another but must get a new license for your current machine If needed, update the IP address in Cisco EMFWhen prompted, enter the new host name Restart Cisco EMF License is a multi-user licenseRestart Cisco EMF Setting by a factor of fourStop Cisco EMF Clear the cache files by deleting the files in /tmp/ostoreOscommsegreservedsize D E IN-2 Time Greenwich Mean Time IN-4